Question about 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2001 dodge truck four wheel drive

I have a 2001 dodge four wheel drive half ton i keep replacing the front drivers side wheel bearing unit it comes has a prepressed bearing set so there is no center nut just three bolts on the back plate holds bearing in place my problem is all the new bearings i get go bad every 25 miles what would cause this. thanks don

Posted by on

  • sopranos62 Jan 04, 2009

    I have brought them at everywhere including napa and carquest i don't understand what is going on.

  • Anonymous Mar 17, 2014

    i need a diagram on front wheel bearing assembly for 1978 chevrolet 4 wheel drive truck

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Where do you buy them at. try buying a better brand. like from napa or carquest.

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle


Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    https://www.youtube.com/watch?v=WvRyg95cUIQ
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

2 Answers

Replacing front drive axle universal joints.


remove front wheel brakes,rotors, axle nut,remove the four bolts on the bake side of your unit bearing using one of the 4 bolts removed from the unit bearing (also knowin as wheel bearing) go get a half dozen of the same bolt only 1 to 2 inchs longer theard them into the unit bearing from the back side and start beating. the unit bearing is a sob to get out but will come out with time once you get it out pull out your axle shaft replace the ujoint and reassemble anti seize everything as you re assemble it

Jul 09, 2009 | 2004 Dodge Ram 2500

1 Answer

1999 dodge cummins 2500 front axel seals


you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

2 Answers

Noise in front wheels of 97 dodge dakota


this is at least one bad wheel bearing, the bearing that is bad will be on the side of the direction you steer that lessens the noise.

May 31, 2009 | 2001 Dodge Dakota

3 Answers

Loud roaring noise in front of dodge stratus ES 2000


i have a 2000 doge straus and i put two sensors in and it still wont shift any ideas out ther it was fine when parked a year ago so i know the tranaxle is good

Apr 09, 2009 | 2001 Dodge Stratus

7 Answers

Loud roaring noise in front, steering wheel has vibration, replaced tires didn't help.


Wheel bearings are likly and I've changed many to solve this problem but it's esy to pick the wrong one with e vehical jacked and on jack stands suporting the car by the lower control arms ( normal ride hieght) run the car with a driver and listen to ti run , of course theres no load on the powertrain so there will be some lash ( power on to power decline ) cheack up. The roaring noise can be isolated by puting a sounding bar ( long metal rod ( sr=crew driver)) other against the part till the sound is rounded up rear but possible the carrier bearings in the (rear end) front drive. The axel bearings and on some units the carrier bearing thats in the CV axel on the block. Sounding rod will find and change the noisey part. Professional help is a good idea if you can't carry this out saftly

Oct 23, 2008 | 2001 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

482 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...