Question about Daewoo Korando

1 Answer

Hi ive got a dent in my passenger side rear door and wont too no the best cheapest and possible way to fix it my car is a Daewoo Nexia.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 6,982 Answers

Remove the inner door panel and with the window up, put a piece of wood against the dented area and smack it with a hammer. Be careful working inside there, the edges of the door insides are sharp. Depending on how bad the dent is this will remove all or part of it. The remainder you can either live with or get some body repair (bondo etc) and repair the rest with that & re-paint. (it's really not that hard to do once you get the hang of it) Just follow can directions!
Good luck and Happy New Year!!

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passanger side doors wont lock


From where , any switch ? driver door switch or either passenger door switch . This is a very complex system controlled by modules (microprocessors)
?€¢
The driver door switch assembly (DDSA)


?€¢
The driver door module (DDM)


?€¢
The passenger door module (PDM)


?€¢
The rear door module (RDM)


?€¢
The LH front power door lock switch


?€¢
The RH front power door lock switch


?€¢
The LH front door lock actuator


?€¢
The RH front door lock actuator


?€¢
The LH rear door lock actuator


?€¢
The RH rear door lock actuator


?€¢
The remote control door lock receiver (RCDLR)


?€¢
The power door serial data circuit


?€¢
The class 2 serial data circuit


?€¢
The DRVMDL Fuse - 10 amp


?€¢
The PDM Fuse - 10 amp


?€¢
The RRINMDL Fuse - 10 a
Class 2 and Power Door Serial Data Links
The class 2 and power door data circuits are both serial data links. The serial data circuits replace cables in the vehicle by multiplexing (time-sharing) data to and from each device over a single wire referenced to ground. If the power door serial data is lost, both the rear door module (RDM) and the passenger door module (PDM) enters the sleep mode. With the RDM and the PDM in sleep mode, no power door operations are possible.
Your best bet is to take it to the dealer or an ASE certified repair shop .

Feb 20, 2016 | 2003 Buick Park Avenue

1 Answer

Dent in my car door


If the dent is not severe and the paint has not cracked around the edges of the dent then an accredited panel beater will be able to pull it back out using suction cups ( like those used to carry sheets of glass) If it is really bad but has not affected the door interior then the quickest and cheapest fix is to have a new door skin fitted. This is a panel beaters job and a door repaint. The last option is to get a door the same colour if possible from the wreckers and have it fitted .

Jul 01, 2014 | Cars & Trucks

1 Answer

Daewoo nexia


YOU NEED TO CHECK EVERY FUSE IN THE CAR

Dec 18, 2013 | Cars & Trucks

1 Answer

My passenger side rear panel is caved in dented


Depending on how bad the dent is you may not even have to take anything apart. I had a buddy that swore he got a dent out of his door by using a vacuum pump that had a special suction attachment. You may be able to use a sturdy plunger, but if the dent has any sharp bends/corners you may need to take it into a body show. They could probably fix any paint chipping or scrapes too. <a href='http://bostonvillage.com/what-we-do.html' >http://bostonvillage.com/what-we-do.html</a>

Oct 09, 2013 | 1999 Toyota Corolla

1 Answer

Hyundai elentra bent frame and door handle


No way to tell without looking at it and taking measurements.
It may be cheaper to replace the doors than to spend the time on repairs.

Sep 05, 2012 | 2010 Hyundai Elantra

1 Answer

Rear passenger side got dent how do i replace it


Joko,
You are not very clear on exactly where the dent is. The area behind the side door is called a "quarter panel". These parts are not easily replaced, as they are a welded, structural member of the car's structure. Replacement requires specialized cutting and welding tools, normally only found in auto body shops. If the dent is not to bad, you could try removing the interior plastic trim panels and pushing outward to remove the dent.
Providing that the paint is not damaged and there is not an actual crease in the quarter panel [commonly referred to as a "pop" dent] I would suggest contacting a DENT WIZARD company. They will come to your house and fix the dent, using specialized tools and skills. Do a Google search for PAINTLESS DENT REPAIR including your geographic location in the search to find local companies who can do this work. It's much cheaper than taking the vehicle to an auto body shop.

Dec 11, 2011 | 2000 Nissan Quest

1 Answer

Hi thank you in advance for your response. I have


I can only give you what happened to me. Is the passenger side front carpeting wet or has it been wet in the past? If so, remove the carpeting/insulation on the passenger side (remove passenger seat as well). Find the wiring harness that runs under the carpet and connects to the car's computer (which is under the passenger's seat). Look for corrosion at the electrical connector and replace if necessary. Also inspect the harness for wear through causing a ground. I had lots of problems with my Daewoo until I found that issue. I would up replacing the electrical connector going into the computer and presto...no more problems! I hope this helps. In addition, you need to remember that the defrosters and AC generate moisture which collects in a little drip pan underneath the heater. There is a drain hose that routinely gets clogged which causes the carpeting inside on the passengers side to get wet. Fix that drain line - replace with a larger diameter hose if possible. I blow mine out regularly using compressed air.

Dec 30, 2010 | 2000 Daewoo Lanos

1 Answer

Broken door windows - deer ran into side of car


Hi:
You can get used door glass from an auto salvage yard, for not too much cash. They aren't hard to install, and your doors are already painted and match the car.

Nov 18, 2009 | 1999 Ford Contour

1 Answer

Why is nexia not in list of daewoo models


http://en.wikipedia.org/wiki/Daewoo_Cielo

Also called Daewoo Cielo, Daewoo Heaven, Daewoo Nexia, Daewoo Racer, Daewoo Super Racer

Feb 02, 2009 | 1999 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...