Question about Honda Accord

1 Answer

Don't know how to replace the wiper blade for honda accord, 1997

I couldn't figure out which type it is. According to what ANCO describes, there are 4 types, A,B, C, and D.

the product is: KwikConnect System
from: Federal-Mogul Corporation, Southfield, MI 48034 USA
ANCO:
31-20
refill with 11-20Recharge U-20R

I could'nt even pull out the out-of -ordereed wiper blade from my car.

any help/instruction is appreciated.

happy new year of 2009!
01/01/2009 from Boston

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk have come up against this problem on hondas and if you wish ? you can replace the wiper rubbers as i have done by going to halfords or other motor supermart and purchase the rubber/blades either same length or longer ? then remove the steel blades from each side of the rubbers on wipers by pulling from bottom whilst flexing the wiper clear ok? then pull out the rubberblade with patience you can easily feed new rubber into w/blade /make sure you insert right way ie there is a notch in rubber that goes to top look carefully ? then re fit steel blades one at a time into grooves in rubber making sure the top locates into notch in rubber job done ! and huge saving on having to buy complete arms and blade in uk rubbers approx £4 a pair ps if you get the longer rubber you can cut to same size as old b4 fitting hope this helps ?

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 Dodge Ram 1500 p/u. I need to change the windshield wiper blades. How do I get the old ones off? The owner's manual refers me to a certain page for instructions and there are no such...


What is different these days is the fact that you replace the blade, as well as it's holder, pretty quick. Gone are the days of just rubber replacement.

Jul 11, 2011 | 2007 Dodge Ram Truck

1 Answer

Can not find replacement on after market windshield wiper


Hello henryk252: My name is Roger and I will help you.You did not say for sure what you needed. But the wiper blades are available from local part stores. The driver side wiper ia a C-24-BB (anco) and the passenger side blade is a C-21-BB (anco). If it was a wiper motor number? The part number for a part manufactured by the company A-1. There part number is 40-1071 and should be available from any parts store. This may be a special order part however. You can also obtain a new motor from the local dealership. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger.
(NOTE) Anco is a trademark name.

Jun 25, 2011 | 2008 Chevrolet Malibu

1 Answer

I'm trying to install anco winter blades and can't seem to get them to click on the wiper arm .


Make sure you are sliding them all the way back and they should clip and lock, some of these anco blades are cheap and wont lock on they just slide back off, maybe try another brand, heres some picture to show you , hope this helps,johnjohn2_9.jpgjohnjohn2_10.jpg

Nov 05, 2010 | 2006 Dodge Magnum

1 Answer

How to install back wiper blade


If its a problem with the connectors , then use the original connectors, if that does not fit, then you have the wrong blades for this car. Hope that helps

Apr 10, 2010 | 2003 Jeep Liberty

1 Answer

Replace wiper switch on a 97 honda accord


97 honda accord that the wipers dont work, they only work when you hold down the mist conroller arm. It has the intermittent controls on the wipers also.

Oct 09, 2009 | 1997 Honda Accord

1 Answer

Need to replace driver side wiper do not know how to get it off


I believe the blade is the same as my F-250, according to the manual. Pull the wiper away from the windshield, then push on either end of the blade, follow blade to pivot point at center, where blade pivots back and forth on wiper arm (wiper arm will not be moving as you do this). You need to push towards the windshield at this pivot point to push in on the wiper arm and out on the blade assembly to pop the round end of the wiper arm out of the hole in the blade assembly. Look at the new blade to see where this attaches. The new one should snap on to the arm when u squeeze the wiper arm to the blade. I prefer Exact Fit brand, as they seem to fit well. If u purchase at autozone, or advanced auto parts, they will install them for free.

Mar 24, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

I have wiper blades for a different car, but. . .


Wiper blades On S-Series Saturns are 22" drivers & 21" pass.Hope This Helps

Dec 20, 2008 | 2002 Saturn Sl

1 Answer

1997 honda accord windshield wiper repair


wiper blades won't move but i can hear the motor working

Dec 11, 2008 | 1997 Honda Accord

1 Answer

Rear Wiper Blades


Anco 25-11 should fit, available at auto zone. countrycurt0

Oct 03, 2008 | 2001 Mazda Tribute

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...