Question about Chrysler LHS

1 Answer

On crysler 2000 lhs i have a roaring soun coming from the right tire that sounds like its getting louder

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 739 Answers

Hi my name is Allen!

With roaring noises coming from the wheel area, we must be very careful in diagnosis because it could be the "Wheel Bearing" which is the most likely cause, but it also can be a tire itself.

Here is how to see which one it is, take the rear tire and put it on the front and put the front tire on the rear.

Next drive the vehicle, if the noise went to the rear of the vehicle and is no longer in the front, then you know its the tire. If the noise is still in the front then you know its the wheel bearing or the CV Joint, but if you do not hear a clicking noise when turning sharply both ways while moving then you most likely can rule out the CV Joints also. Then you know for sure without a doubt it is the wheel bearing.

For further assistance contact me at FixYa!

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

00Linc ls noise from front end sounds like tire road noise steering wheel shakes a little


Wheel bearing? If you turn left and it gets louder. It is the right wheel bearing. And vice versa.

Nov 07, 2015 | Cars & Trucks

1 Answer

Our 2007 impala...the traction light and the ABS light stays on all the time..also we are having a roar sound with our tires as if they were snow tires, but they are not.The noise is loud.. any sugges


I would suspect you have a bad wheel hub (bearing) assembly. The bearings will roar/growl when they start to go bad. I've seen the bearings actually disappear from the hubs because it got so bad. Also, the ABS light will come on when the bearings go bad. I would take it to a mechanic before it gets any worse. BTW, GMs are known to have wheel hubs go bad.

I hope I was able to help you out.

Scott
ASE Certified Automotive Technician
ASE Certified MED/HVY Truck Technician

Jan 22, 2013 | 2007 Chevrolet Impala

2 Answers

Roaring sound front left wheel, maybe a wheel bearing?


It could be the the wheel bearing...again, as you said. I also would like to know if you had the front end aligned when you changed the wheel bearing. If the tires have excessive wear on the outside or inside tread, you are out of alignment and BOTH wheel bearings need to be changed! It could also be the brakes wearing thin...check it out!

Jan 11, 2013 | 2004 Dodge Dakota

1 Answer

How do you get the back tires off of a crysler lhs


loosen the lug nuts, jack the back end of the car up and take them off. Your car should have a jack and lug wrench right in it unless it was removed.

Apr 13, 2011 | Chrysler LHS Cars & Trucks

1 Answer

Ok so i have a loud roaring sound when i get above 50km an hour. It sounds like a normal sound of a car but louder then it should be. and it gets louder at 70 to 80 and then after that it a little softer


it could be a wheel bearing, or tire? but that a guess from a guy on the net that hasnt seen the car. See if you can find out front, rear, right, left.

Aug 31, 2010 | Honda Prelude Cars & Trucks

3 Answers

Loud roaring noise in front of dodge stratus ES 2000


i have a 2000 doge straus and i put two sensors in and it still wont shift any ideas out ther it was fine when parked a year ago so i know the tranaxle is good

Apr 09, 2009 | 2001 Dodge Stratus

1 Answer

1997 Dodge Stratus, unknown roar


Try replacing the front end wheel baring(s) If it is a roar that you can hear resonating from the windows, this is most likely it.

Sep 07, 2008 | 1997 Dodge Stratus

1 Answer

Alero loud humming/roaring sound coming from front end.


That's indicative of a wheel bearing, which is why you were told to change that out. However, it's also possible that the carrier bearings in the differential (where the drive axles attach) have gone bad. That happened to me on my 300ZX several years ago, and I had to replace the diff bearings. I would have them checked out somewhere other than a dealer (you'll probably get a better price from an independent shop).

As a sidenote, to be sure it wasn't a wheel bearing, if you hear it quiet down in a turn one way but get louder in a turn the opposite way, it's likely the wheel bearing. If you turn left at speed and it gets louder, then it's the right bearing (since you're loading up that side of the car). If it gets quieter in a right turn, it's the right side (you're unloading that side of the car and not putting as much weight on it, so it doesn't drag as badly). See if you get that symptom just to be sure that the wrong side front wheel bearing wasn't changed.

Sep 01, 2008 | 2001 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...