Question about 2000 Chevrolet Venture

1 Answer

Program master key for 2000 chevy venture

Help me

Posted by on

  • 1 more comment 
  • bpneeley Jan 05, 2009

    thanks that did it

  • Anonymous Apr 15, 2009

    no power to the starter or fuel pump when you turn the key,engine will not turn over

  • Anonymous Mar 23, 2014

    My 2000 chevy venture won't crank witn key securty light flashes and won't relearn

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

To program a new key...
1-Turn ON the ignition, with the engine OFF, using a master Pass-Key III key (black).

2-Observe the security telltale. After approximately 10 minutes the telltale will turn off.

3-Turn OFF the ignition, and wait 5 seconds.

4-Repeat step 1-3 two more times, for a total of 3 cycles or 30 minutes.
Tech JK
-----------------------------------------------

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the fuel pump on chevy venture


No you need reset your self,turn the key until all dash light come on leaves the switch like that for 30 sec.an then go back and tried

Mar 29, 2014 | 2000 Chevrolet Venture

1 Answer

2000 chevy venture won't crank with key


The pk3 system has a sensor ring around the lock cylinder these go bad a relearn will not fix this because no security code is being sent to the pass key module.

Mar 23, 2014 | 2000 Chevrolet Venture

1 Answer

How do i disable a anti theft system on an 2004 chevy venture that wont start


how do u turn off the anti theft on a 2005chevy venture

Jun 09, 2012 | Cars & Trucks

2 Answers

I put the wrong key in the ignition and had to have ignition replaced. so have new keys that are not programmed to my car.


Take it to a dealer.. only they can program a "master" key. then you can program the second key by starting the car with the master then removing the key and then starting the car with the second key within 5 seconds.

Dec 28, 2011 | 2003 Buick Rendezvous

1 Answer

I want to un program my keyless entry remote on my 2000 chevy so that i can program it to my 2004 chevy truck how do i do that


Do you still have both cars? If not, you don't have to un-program the remote to use it on another car.

If so, then simply reprogram the remotes you want to use on the 2000 chevy and then when you are done only the ones u just programmed will work on it, then simply repeat the process on the 2004 chevy truck.

Apr 11, 2010 | 2000 Chevrolet Venture

1 Answer

Will a 19999 chevy venture door fit a 2000 chevy venture and as well will the back hatch fit as well wich years will fit the 2000 chevy venture?


I belive they will, but call a local wrecking yard, they have interchange manuals that can tell you exactly what years fit.

Jan 10, 2010 | 2000 Chevrolet Venture

1 Answer

Ignition won't turn. 1998 Chevy venture


The tumblers are Bad in the Cylinder Lock.. Its common for Chevy.. Esp if ya have a lot of keys hanging off the key chain.. It Speeds up the wear on the guts of the tumbler because of the weight of the keys constantly working the key mechanism.. Hope this Helps.. Thank you.. Shop242

Mar 11, 2009 | 2000 Chevrolet Venture

4 Answers

Chip key


You can go to ebay and get a transporter key for about $10 shipped to your door. Take it to a hardware store to have it keyed or a locksmith if you know a good one. Next follow the instructions that come with the key. I just bought a Venture cheap and it had only one key. The dealers and everyone else want $60 or more.

Jan 15, 2009 | 2000 Chevrolet Venture

1 Answer

2001 chevy venture lost key


You must get a new key from the dealer. Bring in the registration, and photo I.D. Then they will cut you a key. After that, try this procedure....
  1. With a master passkey III key (Black), turn ON the ignition, with the engine OFF.
  2. Observe the Security telltale, after approximately 10 minutes the telltale will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  6. If it does not work, you will need to get it to the dealer.
GM technicians on-line

Jul 16, 2008 | 2001 Chevrolet Venture

Not finding what you are looking for?
2000 Chevrolet Venture Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...