Question about 1994 Mercedes-Benz E-Class

1 Answer

Front right turn signal bulb is burnt out

Can you tell me how gain access to change bulb? also my dash board lights do not work. are these related? if i replace bulb should this fix bought problems?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

If you open your hood and look right behind the headlamp assembly you will see a gray release tang for the turn signal housing. Just press the tang and pull out the housing. The socket comes out of the housing with a 1/4 turn counter clockwise. Now replace the bulb. The 2 problems are not related so check your fuses and replace any that are blown. It's a good idea to test the fuses with the key on and all lights turned on with a 12 volt test light and not by eyeballing them.

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change front turn signal bulbs


This may help. It shows how to remove the light assembly to gain access to all the bulbs on the front.

Feb 25, 2015 | 2000 Buick Century

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights


was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

Light in dash


possibly dash instrument panel lights burnt out. Check all related fuses and bulbs

Apr 14, 2014 | 1989 Lincoln Town Car

1 Answer

My right front turn signal wont work, the dash board light came on telling me i need a new bulb i put one in and it still does'nt work . I checkd all fuses and they are good , me right rear turn l


are you sure that you put the right bulb in? Some of these bulbs look very similar, (like a 3057 and 3157 or 3156) but they are different. A customer came in with this problem and the problem was that they put a bulb with a single filament in when it was supposed to have a dual filament. the bulbs looked the same and they just grabbed them off the shelf instead of asking the parts guy what their vehicle called for.

May 27, 2012 | Cars & Trucks

3 Answers

Rapid right turn signal on dash but no right rear turn ligt at all


What that rapid turn signal on the dash means is, the rear turn signal tail light is burnt out. This is how you know the bulb is bad. Replace the burnt out tail light bulb and you will be back to normal.

Jan 16, 2011 | 2008 Chevrolet Impala

1 Answer

How to I gain access to the right front turn signal bulb to change out a bad bulb on my 2005 Nissan Maxime?


it is inside the engine compartment just follow the wires that go to the back of the light.you just unscrew the light and change the bulb.

Nov 13, 2010 | 2005 Nissan Maxima

2 Answers

Front right turn signal


i had a bad socket that was my problem on mine.

Dec 10, 2008 | 2000 Oldsmobile Intrigue

1 Answer

1998 wrangler turn signal/brake light short


your socket may not be grounded properly, I have seen this before, and the simplest way to fix is change the socket with a new one.Not another used one it may also be bad.

Jul 30, 2008 | 1988 Jeep Wrangler

Not finding what you are looking for?
1994 Mercedes-Benz E-Class Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...