first, you have to find the battery first.
its either in the engine compartment,
or underneath the driver's chair,
or at the passenger side,
or at the trunk.
if you found it, make sure you label all the wires that you are going to take out.
then remove the battery post, remove tha battery clamp,
then you can remove your battery.
Comments:
Jan 01, 2009
- ok,
so all the sorts that you are talking would be the wires from the positive and the negative cables.
label each one so that in returning them, you won't be confused in returning each wire.
Tnx 4 using fixya,
drcool
Jan 02, 2009
- the cartridge with fuses are bolted to a terminal post of the battery by a nut. then the clamp that holds the battery are secured by long bolts that are hooked under the flat surface where the battery seats. un loosen the nuts that are holding the battery clamp then remove the clamp, then you can remove the battery post with the cartridge in it.
Expert
