Question about 1994 Acura Vigor
Where is the starter Solenoid?
Your solenoid sits right next to your starter on the same housing you can check it by removing your starter from your transmission bell housing follow your positive cable from your battery there will be two bolts . this could be a pain in the **** but you can do it. once you have it out you can check it with a set of jumper cables on the ground . connect your neg: cable to the outer housing were the bolt holes are. then touch the pos: cable to the small bolt and the large bolt at the same time. if the starter ingages at a high speed rpm than its ok this means if the gear in front pops out and spins with no problem. when you do this the starter will try to jump dont be frieghtend. hold it for just a few second so you dont burn out the solenoid. if none of this happens then you need a new starter good luck
Posted on Jan 01, 2009
Hi my car does the same I've never worked on cars before and can't afford to pay someone where do I locate the starter anyone have pics?
Posted on Jun 10, 2013
Hi there my car is doing the same as his, I changed the starter, brand new n its doing the same. Could it b something else like n egnision switch or could my alarm b messing with it. I would like some help if u can I'd appreciate it.
Posted on May 29, 2013
Tips for a great answer:
Aug 16, 2015 | 1994 Acura Vigor
Nov 04, 2013 | 1992 Acura Vigor
Jun 23, 2012 | 1994 Acura Vigor
Jun 26, 2011 | 1994 Acura Vigor
Dec 24, 2010 | 1994 Acura Vigor
Sep 30, 2010 | 1992 Acura Vigor
Jun 28, 2009 | 1994 Acura Vigor
Jun 02, 2009 | 1994 Acura Vigor
Feb 05, 2009 | 1994 Acura Vigor
Dec 26, 2008 | 1993 Acura Vigor
342 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: