Question about 2006 Toyota Corolla

1 Answer

I want to remove and replace the entire headlight of my 2006 toyota corolla S; not just the light bulb, but the entire assembly

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

The Mounts for these are Under the Hood and Look like Wing Nuts But Plastic. Should be around the Area that the Light Harness Plugs into the Back of the Housing

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

How to replace toyota corolla front indicator bulb


I know this is old, but the answers are much more complicated than the actual solution. WebRepOverall ratingThis site has no rating(not enough votes)

If you look at the indicator you can see a hole where there is a screw. grab a philip's head screw driver and remove that screw.
pull it out and you will see the light is attached to a wire, wiggle the black piece attached to that wire out of the light. (don't pull the wires)
now you have the bulb. push it down and twist and it will pop out.
put in a new bulb (push in and twist)
pop that baby back into your car.
shouldn't take more than 5 minutes to do.

Jun 13, 2010 | 1999 Toyota Corolla

2 Answers

How do you replace the headlight bulb on a Toyota Corolla 2003


Hi,

You have to remove the headlight assembly mounting screws and remove the headlight assembly. Remove the power cable by squeezing the lock clip to release the cable, then release the bulb from the headlight assembly. Reverse process for the new bulb.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 08, 2010 | 2003 Toyota Corolla

2 Answers

My A/T shift lever light is out in the console?


Remove upper console cover, remove console box carpet, remove parking brake hole cover assembly, then remove console to access light under shift assembly. Here is a picture, thanks.

http://i386.photobucket.com/albums/oo303/djenn434/console_0000.jpg

Jan 27, 2010 | 2006 Toyota Corolla

1 Answer

2006 Elantra; Does the entire headlight assembly


On these the bulb unscrews from the back

Jul 14, 2009 | 2006 Hyundai Elantra

1 Answer

How do you replace a headlight on a 1999 Toyota Rav 4?


Do you mean the entire headlight assembly or just the bulb?
If it's the entire headlamp look at the new one to see where the fastening points are, the grill may have to be removed and also the parking lamp lens, if it's just the bulb it's easy Open your hood look at the backof the headlight assembly and twist the bulb holder ring to release it. Good Luck To You

Jul 09, 2009 | 1997 Toyota 4Runner

1 Answer

How to replace the entire left side headlight assembly?


to replace : start by raising the hood, un screwing the turn signal and popping it out, next remove the front bumper, this makes everything so much easier, then locate and remove all the nuts and bolts attaching the headlight assembly. fairly simple, just time consuming, good luck and i hope this helps

Jun 01, 2009 | 1998 Toyota Corolla

1 Answer

Replacing headlight


all you have to do is flip the wire keeper to pop out the bulb from the back of the headlight assembly

Apr 30, 2009 | 2005 Toyota Corolla

3 Answers

Replacment of a dash light. Toyota Corolla 1998


There is a plastic garnish surrounding the instrument cluster held in by 2 philips head screws. remove the screws and gently pry the garnish from top first then sides then it should pull out.

Then remove the 3 screws holding the cluster in place (2 bottom 1 top). Once that is done gently flip the cluster bottom up and pull out some to expose the wiring harness. Remove the 3 connectors from the back and then the cluster will pull out.

There are 3 bulbs that control the overall lighting of the cluster. They are spaced about every third across the rear of the cluster. They are the larger Green knobs. Remove the 3 large green knobs and replace the bulbs with the appropriate size. You can call your local parts store to find out the size.

Its a 5 minute job and does not require the entire removal of the dash board.

-ASE Master Tech
-Lexus Senior Tech
99 Corolla Owner.

Mar 13, 2009 | 1999 Toyota Corolla

Not finding what you are looking for?
2006 Toyota Corolla Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...