Question about 1998 Volvo V70

2 Answers

1998 Volvo v70 check engine light stays on always

On starting the 1998 Volvo v70 , the 'check engine' light comes on and then stays on. Dealer said it is due to water condensation some where and suggesed replacing some tubing with a $800+ cost. Dealer said if this is not fixed then this may ruin catalytic converter, eventually costing even more. Does this sound normal?

Posted by on

  • mulberryfam Mar 12, 2009

    I have the exact same problem on my 1998 Volvo V70 Wagon. I have it in the shop today waiting on a diagnostic assessment. Bought mine one year ago from a wholesaler, and had their mechanic look at it at that time. The mechanic made a valve adjustment and said it was fine. A friend lent me his OBD tester and it said there was a leak, but the performance of the car never really changed until now (it has been a year). Now it is runs loud although never stalls or has RPMs high or temp high. Waiting to see!

  • 240cpa May 11, 2010

    Did the dealer show you the computer diagnostic codes they found to reach that conclusion? If not, ask them to show you and then have them explain what they mean. Write them down and confirm them with another shop, then ask that shop to check on their computer.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

Go to your local auto zone the will tell you what is wrong and why the engine light is on >>
> Using a Code Scanner <
and the best part it is free

Posted on Jan 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 379 Answers

I have the same problem with my moms 1998 Toyota Camry but one point i got it to turn off

Posted on Aug 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi can you please tell me what the two scensors are for before the catylitic converter on a volvo v70 2.5 10 valve 1998, and are both needed as i have a problem getting a front pipe/cat with two holes for...


Lambda sensors, they measure your fuel air ratio being burnt by the engine and addapt the management system accordingly. You will have to put them both back or the check engine light will stay on.

Feb 16, 2011 | 1998 Volvo V70

1 Answer

Have a v70 Volvo wagon headlight will come on sometimes, High beams always, replaced headlight switch cost $60 and lights still not coming on. what could it be.


check the fuselink as well give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Mar 06, 2010 | 1998 Volvo V70

2 Answers

Volvo T5 V70 (Tracs/ABS dashboard lights)


99% Bad ABS Module.

Unless you have a cut ABS wheel sensor.
I fix them my self.

elrobvolvo@yahoo.com

Jan 08, 2010 | 1998 Volvo V70

1 Answer

ABS light stays on after replacing front axles and cv joint on 1998 maxima


If you have NOT had the abs sensor disconnected as part of the process for this repair then it is likely that the sensor has been damaged by the knocking of a hammer on the suspension!
If you have had it disconnected then the dealer will need to reset it with their diagnostic equipment. You should always remove abs sensors before hammering on suspension components

Aug 23, 2009 | 1998 Volvo V70

2 Answers

DeI have a 1998 Volvo V70 and recently had a


Check engine idle speed, check fuel filter, check fuel system for water ect, add dfry gas to take out water, check distributor caps and wires, check emision system , check spark plugs, check for manifold lead, check fuel injectors, and fuel control system.

Jul 01, 2009 | 1998 Volvo V70

1 Answer

Emission light is on, service light is on, missfire,


all that has nothing to do with this lights being on, you have a malfunction in the electronic engine controls, to find out what it is have the dealer test the system for trouble codes which are stored in the memeory of the cars computer whenever this light(s) comes on.

Jun 12, 2009 | 1998 Volvo V70

2 Answers

Radio code 1998 volvo v70


your going to have to call up your local volvo dealer and give them your vin number and they can look it up for you. You can try using radio-code.com but i wouldnt recomend it. Your best bet is calling your local volvo dealer and they will help you out.

Feb 21, 2009 | 1998 Volvo V70

1 Answer

Srs light on


You will have to take it to a dealer.

Jan 12, 2009 | 1998 Volvo V70

Not finding what you are looking for?
1998 Volvo V70 Logo

1,820 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...