Question about 1991 Eagle Talon

3 Answers

My park & tail lights go out when I turn on the head lights

I have already changed the signal light arm which holds the light switch (the signal light arm was a used one)

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 359 Answers

Did you check fuses carefully this is all same circuit

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

Did you change the fuse it's possible that it's close to completely dead.

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 55 Answers

Check you fuses first, than your relays. You will need to look in a repair guide to find exactly where they are. If all those are good than you have a problem in the wiring.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm needing the wiring diagram for my 2007 Chevrolet Impala LT 3.5 tail lights.


Go to http://www.bbbind.com/free_tsb.html free wiring diagrams ! You having tail light problems ? Do you know how they work ?

They are turned on by the BCM !
Park, Tail, Marker and License Lamps
The park, tail, license, and marker lamps are turned ON when the headlamp switch is placed in either the HEAD or PARK lamp positions, or anytime the automatic light control (ALC) turns the headlamps ON. When the headlamp switch is placed in the park lamp or headlamp positions, ground from G202 is applied through the signal circuit to the BCM indicating the park lamp request. In response to this signal, the BCM applies ground through the park lamp relay control circuit energizing the PARK LP PCB Relay. With the relay energized, battery voltage is applied through the switch side of the relay, both park lamp fuses, and the supply voltage circuits illuminating the park, tail marker, and license lamps. Ground for the left front park and marker lamps is provided at G101 and the right front park and marker lamps at G100. Ground for all rear lamps is provided at G302.
Turn Signal Lamps
The LT T/SIG and RT T/SIG fuses located in the underhood fuse block supplies battery positive voltage to the body control module (BCM) for turn signal and hazard lamp operation. When the turn signal switch is place in either the LEFT or RIGHT position, ground from G202 is applied through the turn signal switch signal circuit to the BCM indicating the turn signal request. In response to this signal, the BCM applies a pulsating voltage to the front and rear turn signal lamps supply voltage circuits cycling the lamps ON and OFF. The BCM also sends a message via GMLAN to the instrument panel cluster (IPC) to cycle the turn signal indicator ON and OFF depending on the position of the turn signal switch.
Ground for the turn signal lamps is supplied as follows:
?€¢
G101 provides ground for the left front turn signal lamp


?€¢
G100 provides ground for the right front turn signal lamp


?€¢
G302 provides ground for the left and right rear turn signal lamps

May 03, 2016 | 2007 Chevrolet Chevrolet Impala LT

1 Answer

My tail lights don't work but head lights a turn signals work and dash lights don't work


The dash lights are on the same circuit as the tail lights/park lights. If the front park lights are not on as well, look for a blown fuse . If fuse is ok. possible headlight switch/relay/wiring problem

Feb 12, 2016 | Cars & Trucks

1 Answer

How do I fix a problem with not having any head or tail-lights


Two possibilities. The head light switch or the turn signal switch. All the exterior lights run threw the turn signal switch. I am assuming you already checked fuses.

May 24, 2015 | 1999 Toyota Camry Solara

1 Answer

I have a 97 nissan pickup and the head lights will not turn on, an the tail lights will not shut off. had to take fuse out to turn off tail lights. turn signal switch??


Yes it sounds like the switch is stuck in the park position.
You could pull the harness plug for the switch and check the circuits with a meter, or replace the switch.

Jan 25, 2013 | 1997 Nissan Pickup

1 Answer

1994 Pontiac Grand am Tailights all work normaly except when the headlights are on and then they don't work at all?


Could be the headlight switch.
The switch has two sets of contacts for the parking lights, the park position and headlight position.
You may need to check the circuit at the switch to see if you are loosing power when the switch is moved from park to head.

Dec 23, 2012 | 1994 Pontiac Grand Am

1 Answer

1978 Cadillac Eldorado turn signal lights show parking illu & tail lights keep dark


see the diagram and fix it.Test the fuse,lose connection, dirty, corrosion, oxide.continuity.
God bless you
9_28_2012_9_08_36_pm.jpg

Sep 28, 2012 | Cars & Trucks

1 Answer

Rear brake lights and turning signals not working. One tail light has been out for very long time, but brake lights and signals just stopped working few weeks ago.


I'm checking into that same problem for a early 90's buick ( it's a GM also ) , I've checked the obvious ( bulbs, flasher,fuses,etc) all where fine. I assume your front turn signals work if you manually operate the turn signal switch or put on the hazard switch? The Buick's rear lights won't come on even with the hazard switch on. When you say one tail light has been out for some time, do you mean the brake/signal light or park/running lights? The Buick was like that with one side out for a while ( brake/signal light) but both the rear park/running lights work. Now, I've narrowed the problem down to the turn signal switch. I'd bet money on it. I just have to dig out my steering wheel puller, bite the bullet and get 'er done. You should be carefull if you're attempting that repair yourself ( AIRBAG ), use a manual. ( You could do a quick test by trying the turn signal while you pull the bottom of the arm toward you,move some of the wiring in the column near the arm,etc. I did and the signals started working. Could be the switch,dirt or a broken/loose wire. there's a lot of wiring going through the column and a lot of movement ( turn signal,high beam,cruise, then add tilt) Hope this helped.

Sep 20, 2011 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
1991 Eagle Talon Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...