Question about 1983 Ford Fairmont

2 Answers

1993 ford ed will not start after fitting car stereo

1993 ford ed we have fit a new car stereo and now the car will not
start keeps turning over no spark checked all fuses in side car all ok
please help me .i have fitted car audio for 16 years never have had
this problem before what can i do

Posted by on

  • 3 more comments 
  • alunn Jan 01, 2009

    thankyou these fusable links do they look like any fuse that you

    can replace easy

  • alunn906 Jan 01, 2009

    these fuses links are easy to replace and would this be the problem

    why the motor is turning over but not starting and no spark

    all fuses in side kick panel are all ok

  • Anonymous Feb 06, 2009

    need to know how to change dissy

  • shakir651 Mar 06, 2009

    I have the same problem on my 93 fairlane!!!
    I cut the wiring harness from the old factory stereo to put a new on in and now the car just cranks but no spark. And the remote entry doesnt work..
    No smartlock light...

    I have a new Body ELectrics Module which I have replaced but because the battery is now dead I am charging it tonight but I dont think this has fixed the problem.
    All fuses are ok! Int light OK!

    Please help if you solved this weird problem!

    shakir @sexbeatrecords.com (Remove the spaces)

    Thanks!!



  • shyspeed May 11, 2010

    thought these were security coded?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I will check this are they easy to replace and if it is damaged
would this be the problem why the car is turning over
but not starting i checked for spark but no spark
all other fuses are ok in side the main fuse box down
by kick panel and other things EGlights wipes air con
all working fine .you help is making life a bit better
thankyou

Posted on Jan 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Did you check the fusable links, It has been so long since I worked on one but should be close to your battery also check for twelve volts at starter. and check for voltage at solenoid from key switch. You should be able to hear it click.

Posted on Dec 31, 2008

  • David Johnson
    David Johnson Jan 01, 2009

    Actually they are generally identified by a plastic ring in the wire. If it is bad it will be burned are you you pull on the wire gently it will feel like it stretches. because the fuse wire inside has burn into because of a short. You can buy new ones or you can strip them back and twist them back together, but keep in mind these are there to keep the car from cacthing on fire in case of a short, and that is very important

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the stereo in a 1993 Ford Aerostar


There is a special tool that is needed to remove most stereo's and then you need wired connector that fits your vehicle for the one you are putting in. The rmoval tool is $10-15 at walmart.

Dec 04, 2015 | Ford Aerostar Cars & Trucks

1 Answer

Will a auto transmission cooler from a ED falcon fit an EF falcon


If it is in the radiator it should as the fittings are the only problem you are likely to encounter. If you are wondering if the cooling capability is affected consider this . Hot tranny oil has to be cooled in the radiator water and this heat makes the radiaror work hard.Why don"t you consider a external cooler. They keep the oil cooler as they are are running in the outside air. Ie air temp 30 deg C oil temp 150c+ water temp 85degC oil temp 150c. You can see that the tranny oil looses more heat and it will not overload the radiator capability

Jan 26, 2013 | Ford Cars & Trucks

1 Answer

2005 Ford Crown Vic, Cruise Control stopped working after I installed an aftermarket stereo. Alpine All-on-One


This sounds like as you have explained the removal of the factory fitted stereo is connected to the controls/ steering column by fitting the new stereo some electrical items remain unconnected. The volume control may be in circuit.
I have experienced this before on other models when fitting non factory extras.

Jan 12, 2013 | Cars & Trucks

1 Answer

Need a wiring plan for ED 1993 ford falcon Radio


We do not have wiring diagrams here at fixya, sorry.

Sep 16, 2012 | 1983 Ford Fairmont

1 Answer

Fitting a stereo in a 1993 Nissan Sentra


if you are putting an after marker stereo the wiring is different from a stock radio some audio stores sell adapters for after market stereos that you jus clip on to stock wiring

Nov 14, 2009 | 1993 Nissan Sentra 4 Door

1 Answer

1993 ford escort spark plug removal.


16mm plug spanner, a regular socket is ok so long as it is a tight fit.
Use an extender and a crossbar on the socket instead of a ratchet, that way you can keep the socket dead straight.

Sep 21, 2009 | 1993 Ford Escort 4 Door

1 Answer

Couldn't find the grease fittings on a 99 Taurus station wagon.


Grinding noise while turning , sounds more like to me that you need to replace a CV joint. hope this is helpful information.

Jul 29, 2009 | 1999 Ford Taurus

1 Answer

Fitting a new car stereo to the old wiring


hmm, this is an old post, do u still need help??
If u do lemme know and i'll give u a few tricks u can use.

Sep 28, 2008 | 1993 Volkswagen Fox

1 Answer

Removing Car Stereo from ford Festiva (1998/9 model)


yes it was not avail. because its a aspire after 94. and you can pick up a ford stereo removal tool at local parts store, that is if you have 2 holes on both sides of the radio

Sep 15, 2008 | 1993 Ford Festiva

Not finding what you are looking for?
Cars & Trucks Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...