Question about 1984 Ford F 150

1 Answer

1987 f-150 sometimes will not go into gear.

How do i adjust the clutch on a 1987 f-150 four wheel drive
with a 4-speed transmission.

Posted by on

  • Anonymous Mar 20, 2014

    wont go into gear

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 180 Answers

Limited adjustment under dash, most likley slave cyld. or worn clutch and pressure plate.

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Ford Explorer 5 speed driving it without the clutch slave without the clutch and without the 5 speed gear shifter how to get into 3rd gear


the process involves plenty of hydraulic fluid as well as gears and clutches.
If you have an automatic transmission, and it "slips" while you are driving it-that is, the car engine revs without the power going to the wheels-the most common cause (though not the only possible cause) is low transmission fluid. If the slipping is caused by low fluid, it will get worse as the transmission gets hotter.

Apr 04, 2016 | Ford Cars & Trucks

1 Answer

Will not go in to four wheel drive


Dodge Ram 1500 Questions - 4WD not engaging all the ...

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.

Diagnosing 4WD Engagement Problems on Dodge Ram ...

dodgeram.org > Main > Tech > Maintenance
Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having

2008 Dodge Ram 1500 Won't Engage 4 Wheel Drive: 20 ...

www.carcomplaints.com/Dodge/Ram_1500/.../drivetrain/wont_engage_4...
Ram 1500 Won't Shift Out Of 4 Wheel Low - Ram got locked into 4 wheel low. Found this ..... It would not go into full time 4 wheel drive or go into 2 wheel drive.

Software Update and Axle Disconnect Actuator ... - RepairPal

repairpal.com > Problems > Dodge > Ram 1500

Feb 08, 2016 | 2004 Dodge Ram 1500

1 Answer

Four wheel drive not working on a 1990 chev 1500 pickup with manual tranmission?


Yep! it does sound as if you've lost the proper connection between your engine flywheel and the transmission clutch-plate. That baby is crying for your TLC after being such a faithful trooper all these years.

Jan 08, 2014 | Cars & Trucks

1 Answer

Noticed that the revs would build too quickly and did not match the 2004 Rav4 speed in higher gears. 1st gear seems OK. If I accelerate gradually there are no problems. So I'm guessing I need my clutch...


You are exactly right. The clutch is going out. The cable is an automatic adjusting cable. So there is no adjustment. It will require a new clutch.

Jan 24, 2011 | 2004 Toyota RAV4

1 Answer

I just want to know the best drive to drive my 2007 Envoy in snow & ice on hills. My gears are 2up, Auto, 4up & 4dn. I drive in 2up, but today in the snow I put it in Auto, It drove pretty well. ...


The basic explanation of these gears are as follows.
2up/2wd is a basic two wheel drive setting where the vehicle will react as a rear wheel drive. In this gear the transmission will only distribute power to the two rear wheels(best for all around driving with clear road conditions and will give the best fuel efficiency).
4up/4wd is a high speed four wheel drive setting. in this gear the transmission will always distribute power to all four wheels and will allow you to drive at higher rates of speed( good for poor road conditions when ice and wet roads are a moderate risk).
4dwn/4lo is a low gear four wheel drive setting where again the transmission will distribute power to all four wheels but will limit you to a low rate of speed(good for really rough roads and severe weather or very poor traction conditions).
auto gear selection is basically a all wheel drive setting, where the transmission will use a primary setting of rear wheel drive gearing until the vehicle slips or looses traction on one of the drive traction. as soon as the transmission detects a difference in wheel speed between the two rear wheels, at which time the transmission locks up the front differential turning itself into a four wheel drive, until the wheels have regained traction and remain spinning at the same speed for a set amount of time, at which time it will then unlock the front differential at return to a rear wheel drive setting. this is a good all around gear but will cause you to get slightly less mpg/kpg then a 2up/2wd gear would. i hope this helps

Jan 09, 2011 | GMC Envoy Cars & Trucks

1 Answer

Ignition, will not start, no spark att all... The camshaft provider tested its ok, seems to be no electricity going To the provider...


    Types
  1. The 1993 Dodge transmissions could be found in the Caravan, Colt, Dakota, Daytona, Dynast, Intrepid, Ran Van, Ram Wagon, Ram Charger, Shadow, Spirit, Stealth, Viper and W150. Each had a unique array of transmissions best suited for the model's design.
  2. In 1993, the Dodge transmissions varied between 3- and 6-speeds. A 3-speed automatic transmission was available, and there was a variant that included overdrive. The only other automatic transmission included 4-speeds. A 5-speed manual gearbox found its way into several of the 1993 Dodge models, and a 6-speed manual was equipped in the Viper.
  3. The number of speeds and style of transmission may have looked the same on paper, but it did not mean they were all the same. An automatic transmission in a passenger sedan could be geared drastically different from one in a truck. Transmissions may have the same number of speeds, but they may not be geared identically.
  4. Transmissions were used in the 1993 Dodge to effectively transfer power from the engine to the wheels of the vehicle. The power could be passed to the front or rear wheels. Models equipped with all- and four-wheel-drive had power at all four-wheels.

Jan 08, 2011 | 1993 Audi 100

3 Answers

Rear cluch not working


Depends on what model and components you have:

{ ...
ENGINE TORQUE DISTRIBUTION – DIRECTING THE FLOW OF POWER
In an all-wheel-drive vehicle, engine power can be directed to all four wheels. Subaru Symmetrical AWD differs slightly from model to model in how it directs power to the wheels, depending on its transmission.

MODELS WITH FIVE-SPEED MANUAL TRANSMISSION – CONTINUOUS ALL-WHEEL DRIVE: A viscous-type locking center differential and limited-slip rear differential help distribute torque – normally configured at a 50/50 split front to rear. If wheel speed differs between front and rear axles, the center and/or rear differentials lock up to help distribute power to the wheels with the most traction.

MODELS WITH FOUR-SPEED AUTOMATIC TRANSMISSIONS – ACTIVE ALL-WHEEL DRIVE: An electronically controlled variable transfer clutch and limited-slip rear differential distribute power to where traction is needed. Sensors monitor parameters such as wheel slippage, throttle position, and braking to help determine torque distribution and direct it to the wheels with optimum traction.

MODELS WITH FIVE-SPEED AUTOMATIC TRANSMISSION – VARIABLE TORQUE DISTRIBUTION ALL-WHEEL DRIVE: As with Active All-Wheel Drive, an electronically controlled variable transfer clutch distributes power, but through a planetary-type center differential and a viscous-type limited-slip rear differential. Torque distribution is normally configured at a performance-oriented rear-wheel-biased 45/55 split front to rear. Sensors monitor the same parameters as for Active All-Wheel Drive.

WRX STI, WITH SIX-SPEED MANUAL TRANSMISSION – DRIVER CONTROLLED CENTER DIFFERENTIAL (DCCD) ALL-WHEEL DRIVE: The STI uses an electronically managed multi-plate transfer clutch and a mechanical limited-slip differential in conjunction with a planetary-gear-type center differential to control power distribution between the front and rear wheels. Featuring manual and three automatic modes, DCCD is normally configured at a 41/59 split front to rear. Sensors monitor parameters such as wheel slippage, steering angle, throttle position, and braking to help determine torque distribution and direct it to the wheels with optimum traction. DCCD also features a limited-slip helical front and Torsen® rear differential. ... }

And what are the symptoms? How do you know the coupling to the rear is not working?

Jun 05, 2010 | 1995 Subaru Legacy

1 Answer

1998 and 2000 jeep grand cherokee


This Info taken from Wikipedia, the free encyclopedia
http://en.wikipedia.org/wiki/Grand_Cherokee
Hopefully this will answer your question.

The redesigned WJ 1999 Grand Cherokee shared just 127 parts with its predecessor. The structure was stiffened by PorscheEngineering for sharper steering and lighter weight. The spare tire wasrelocated from the side of the cargo compartment to under the floor togreat relief of owners. The two heavy pushrod V8 engines were replaced by chrysler's first clean sheet V8 since the 60's (SOHC aluminium heads, plastic intake), Chrysler's then-new PowerTech. Although this engine produced less torquethan both previous V8s, it was lighter and got much better fuel economyand provided similar on road performance figures (the 23 gallon fueltank was replaced with one of a 20.5 gallon capacity). The Inline 6engine was also updated in 1999. 10 horsepower (7.5 kW) was added byredesigning the intake manifold. The manual transmission was dropped with this model.
While other Jeep vehicles used the Mopar 5 x 4.5 bolt circle, thiswas the first Jeep following the 1987 Chrysler buyout to receive awider bolt pattern — 5 x 5. The 5 x 5 bolt pattern (also 5 x 127 mm),although common to GM rear wheel drive vehicles and light dutytrucks/vans, has spread beyond its use with GM (and Ford with their 1973 to 1978 LTDs and Lincolns). Chrysler first used the 5 x 5 pattern on full-size half-ton Dodge Ram pickups and Dodge Ramcharger SUVs in 1986.
A notable feature available in this generation was the automatic four wheel drive option called Quadra-Drive II.With three viscous clutches, it was one of only a few four wheel drivesystems at the time with triple locking differentals, joining thecontemporary Mercedes Gelandewagen, Mercedes Unimog and Magna SteyrPinzgauer, and the only one of the four with fully automatic operation,although the axle differentials could not be manually locked like inthe other three vehicles.
The 45RFE and 545RFE automatic transmission in the WJ was notable. It included three planetary gearsets rather than the two normally used in a four-speed automatic. Thisgave it six theoretical speeds, and it would have been the firstsix-speed transmission ever produced in volume, but it was programmedto only use five of these ratios. Four were used for upshifts, with adifferent second gear for downshifts. Although five of the six ratioswere used, Chrysler decided to call it a "4-speed automatic". In 2001,the programming was changed to make use of all six ratios. Rather thanhave six forward gears, the transmission was programmed to act as afive-speed with the alternate second gear for downshifts. The RPM at70 miles per hour (110 km/h) on a 545RFE is 2000 rpm, 200 rpm less thanthe 45RFE programming. 1999 and 2000 model year WJ owners can havetheir 45RFE transmission's programming flashed to enable the extra gearas both transmissions are physically the same. The 42RE 4-speedautomatic remained the transmission for the Inline 6 engine. It was notchanged from the previous model Grand Cherokee's.

Feb 14, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...