Question about 2000 Ford Windstar

1 Answer

Shaking in the front end

At speed sometimes it shakes but i dont feel it in the steering wheel you can turn wheel slightly left or right and it will stop rotated tires no difference also does when you first apply brakes
99 windstar 135000 miles

Posted by on

  • Anonymous Mar 25, 2014

    car shake when giving it gas at 45 mphand does so as long as you are accelrating but stop when letoff gas .has new tires and inspected at shop on front end thks

  • Anonymous Mar 26, 2014

    slight gear noise in left wheel when I apply brakes

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have the brake discs checked, as they may need to be machined or replaced.Also have them check the idler arm and tie rod ends.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Infinity QX-56 and it shakes terribly when I apply the brakes when driving at highway speeds. It also feels like the suspension is bad when you go over a bump or hit a pot-hole.


Warped brake rotor usually cause high vibration at high speeds. But you can also feel it at lower speeds. But bad ball joints and tie rod end will cause vibration at high speeds. Ball joints will pop at pot holes, sometimes. Tie rods can be felt in the steering wheel at a stop. Move the wheel slightly to the left and right, you can feel/hear a tap as you turn it.

Nov 28, 2015 | 2008 Infiniti QX56

1 Answer

Front passenger wheel


Have a competent mechanic determine what is wrong.

Mar 14, 2014 | 1993 Toyota MR2

1 Answer

Driveline vibration


replace the warped disc rotors , check/ replace the front wheel bearings

Mar 30, 2017 | Subaru Cars & Trucks

2 Answers

Steering wheel and tire issue


Have a front end suspension check done to eliminate any worm ball joints -shockies- worn suspension rubbers-- steering problems. If ok have a wheel alignment done and have the rear end aligned first as it affects the front alignment. The violent wobble is castor wobble and indicates negative castor possible from sagging suspension springs. The camber is out at that results in the car following every dip in the road. The camber has to work in conjunction with the toe-in measurement and if the 2 are not correct then you will have problems.

Nov 20, 2013 | Ford Cars & Trucks

2 Answers

When driving my lincoln, it has a slight shake. Do you know what that could be


Most likely a tire that has a broken bet,or there is a front end part that is bad.

Aug 24, 2010 | 2000 Lincoln LS

1 Answer

Feel shake in the floor and steering wheel at around 70 mph and a slight turn on the steering wheel you can feel it a little more. what parts could cause this? already had the wheel balances checked.


Tierod ends. Bad belt in a tire. If you have a bumpy brake pedal, a warped rotor has enougn play to bounce against pads. Also Hub bearings were known to fail after 35,000 miles.

For Hub bearings there may be a Service Bulletin, but your vehicle is going on 10 years old. Usually the side that shakes the most on a opposite curve is the problem side. As in left curve the outside right tire is spinning slightly faster, right side curve its the left side spinning faster.

May 26, 2010 | 2001 Mercury Mountaineer

1 Answer

1998 tiburon front end shaking


if your tires are ballanced then you need tie rod ends or ball joints jack up one wheel and **** tire left and right and see where the play is coming from even if you can replace the worn parts you will still have to get a front end allignment

Jul 03, 2009 | 1998 Hyundai Tiburon

1 Answer

1997 Mercury Sable thumping in front end


try to replace the wheel bearings.

Jun 17, 2009 | 1997 Mercury Sable

1 Answer

Car steering


There could be numerous problems going wrong. Your car is rear wheel drive so it could very well be a bad wheel bearing. If it is extremely loose it can cause a shake in your steering wheel. You may want to check on the condition of your tires and rims especially the left front. A bad tire can cause a shake and pull. If you know how to use your car jack you can try jacking the vehicle up, and put both hands on your front wheel and move it manually to see if there is looseness. Most shops only charge about 1/2 hour to shake down the front end. BMW parts are expensive so be prepared!

Jul 19, 2008 | 1994 BMW 3 Series

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...