Question about 2003 Ford Taurus

1 Answer

Turn head lights on every light works except low beams

Checked both fuse box in car and under the hood power box all good replace pass side head light same thing

Posted by on

  • Anonymous Mar 25, 2014

    car wont start up but have a 25A fuse blown under the hood

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

Thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why do all lights work except low beam driver side head lamp?


Seems like if your other low beam is lit, there's something wrong with the new bulb. Make sure it's the exact type needed, and switch the working bulb from the pass. side to drivers side to check.

Feb 22, 2016 | 2010 Nissan Altima

1 Answer

97 Tacoma has no low beams and high beams work fine except the indicator light in the dash doent work.


Matt, sounds like you were thorough. I would check the switch. Use a tester or even bypass the switch. If you have power, fuses are good, and its NOT the bulb (because there are two filaments) I would look at the switch then the wires.

Jan 22, 2015 | Cars & Trucks

1 Answer

97 Tacoma has no low beams and high beams work fine except the indicator light in the dash doent work.


Ck the relay switch the high one to the low they are the same also I believe they are fused in the one fuse box under the hood behind the battery

Jan 22, 2015 | 1997 Toyota Tacoma

1 Answer

Low beam head lights don't work 1999 Lexus LX470


Don't forget to check the Relays.... Black boxes associated with the fuses... Also there are usually two fuse blocks ONE inside of the car on the drivers side: Under the dash, or on the side of it. TWO is under the hood in the engine compartment area either on the firewall or on one of the fenders usually close to, same side as the battery.

Feb 25, 2012 | 1999 Lexus LX470

2 Answers

2003 GMC Envoy low beam head lights will not come on. The bulbs are not blown, fuse's ok, no power coming to the head light connector. minimal power to the fuse compartment with fuse removed. 9 to 10...


The problem is a Headlight module. Fuse box under the hood has two black modules side by side, the one on your right is the headlight module the one on the left is the fan module. Try swapping them, if the headlights work replace bad module, don't drive vehicle with the bad module in the fan slot. Mine kept going bad because I had a high intensity bulb on one side.

Oct 02, 2011 | 2003 GMC Envoy

2 Answers

I have running lights and high beams but only the drivers side low beam works. checked the fusw box one of the fuses there has not power coming to it?? (the fuse was fine)


According to the wiring diagram, the left and right low beams are connected to the same wire which is
vt/or. Check for power on this wire. Also check for a good ground on the black wire.

Apr 16, 2011 | 1996 Jeep Grand Cherokee

1 Answer

F 150 Head light issue


You know the fuse for the high beams is good ( Cab fuse panel fuse # 16 ) and the pass low beam fuse ( cab fuse panel # 26 ).
Might want to check cab fuse panel fuse #28 ( this is the driver's side low beam ).

If this fuse has power on both sides ( with the low beams on ) next you can pull the headlamps, and check for power at the connectors, but depending when the last bulb change took place, I would say you need need bulbs. ( need at least 1 for the high beam out )
Confirming with a meter at the headlamp would be a good idea, before spending the money.

The bulb connector has 3 pins.
Black wire is ground on both sides
Light Green w/ Black stripe wire is high beams on both sides
Driver Lo = Dark Blue w/ white stripe
Pass Lo = Dark Green w/ Orange stripe.


Nov 16, 2009 | 2002 Ford F150 Regular Cab

1 Answer

Low beams


hello i no you said you checked your fuse box go under your hood drivers side near your strut tower their problay is a second fuse box its black some times fuses is on the cover you have to unlock the side of cover lift off on inside of cover will list what is what sometimes left and right headlamps are seperate fuses goodluck

Jul 23, 2008 | 1989 Honda Accord 4 Door

Not finding what you are looking for?
2003 Ford Taurus Logo

Related Topics:

555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...