Question about 2006 Toyota Corolla

1 Answer

How reset maintance required light

Reset maintance required light

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON, do not start the engine.
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Posted on Dec 31, 2008

5 Suggested Answers

  • 32 Answers

SOURCE: Maintance Required light on. How can I turn it off?

pull the instrument cluster and there will be a switch behind the cosmetic cover near the speedo.

Posted on Jun 20, 2009

  • 62 Answers

SOURCE: HOW DO I RESET MAINTANCE REMINDER LIGHT

go to garage with computer for reseting engine mange

Posted on Jul 29, 2009

  • 5 Answers

SOURCE: Reset code/sequence for Maintenance required

it ill get cleard when it gets checked . if u fixed the problem urself then go to autozone they can clear it or u can buy a tool to do so

Posted on Sep 10, 2009

  • 563 Answers

SOURCE: the maintance requires yellow light is on. i got a

You could reset it by turning the ignition-key to 'ON'.
Then hold down the tripmeter knob until the
maintenance light goes off, that resets it.

Posted on Nov 19, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It hasnt been a month since the oil was changed in my 2011 Toyota Camry and the maintance required was reset. Now the maintaince required has now came back on. What would the the problem since I know


Take it back to the oil change place. Or check the oil. If a seal is leaking or oil filter was not tightened or put on correctly oil may have leaked out and you will blow your engine!

Is is there any oil leaking in garage or driveway or where you park?

Jul 25, 2014 | 2011 Toyota Camry

1 Answer

I cant shut off my maintance required light for my scion tc 2007


first this is for your oil change light, only after having it changed, you will have to reset it, most oil change places know how to do this

Dec 14, 2010 | 2007 Scion tC Coupe

1 Answer

My 1999 Chevy Silverado is has Electronic Shift 4WD and the AWD Button is Lit and won't shift ,4WD Maintance Required Light is on ,when you turn the wheels it feels like it is in 4WD but after Bareley...


When The ( maintance required) light is on it is telling you that their is an electronic fault in the four wheel drive system.You will need to have a scanner hooked up to help diagnosis the fault. their are several micro computers and solenoids in the system and it would be to expensive to guess which parts my be required to make the system function correctly

Dec 14, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

The maintance requires yellow light is on. i got a


You could reset it by turning the ignition-key to 'ON'.
Then hold down the tripmeter knob until the
maintenance light goes off, that resets it.

Nov 19, 2009 | 2000 Honda Accord

2 Answers

Reset code/sequence for Maintenance required


Insert the key in the ignition in the off position.
Press and hold the Select/Reset dial beneath the speedometer.
While continuing to hold the dial, start the car.
Continue to hold the dial for a few seconds until the light turns off.

Sep 10, 2009 | 1999 Honda Accord

1 Answer

HOW DO I RESET MAINTANCE REMINDER LIGHT


go to garage with computer for reseting engine mange

Jul 29, 2009 | 1990 Plymouth Voyager

1 Answer

How to get rid of maintance required light


1. Turn on the ignition and make sure it is on your odometer display, not the trip display.
2. Turn off your ignition. Hold down the trip meter reset button and turn the ignition on. Keep the button pushed in.
3. The maintenance required light will flash for a few seconds. when it turns off, let go of the reset button.

The the display will change for 1 second and go back to the mileage. That's it.

Jul 06, 2009 | 2005 Scion xB

1 Answer

Maintance required light came on.


sometimes this light is 'timed' and comes on after a given number of kilometers and can easily be reset.... but if you are refering to your 'check engine light' you may have a bigger problem and you need a code reader (OBDII) and then you can determine where the fualt is

Jun 18, 2009 | 2003 Honda Accord

1 Answer

Maintance Required light on. How can I turn it off?


pull the instrument cluster and there will be a switch behind the cosmetic cover near the speedo.

May 17, 2009 | 1995 Mitsubishi Mighty Max

2 Answers

Maintance light


To reset your maintenance reminder system (even if the light hasn’t come on yet), you’ll need to turn your key to on (but don’t start!) and make sure your odometer is on TRIP A. Then key off. Press and hold the Odometer/Trip button. While holding down on the button, key the ignition to on (Don’t start the engine!) The display panel will count down from “------“ to “-“Continue pressing the button until the Trip A is displayed.

Mar 28, 2009 | 2007 Toyota Tundra

Not finding what you are looking for?
2006 Toyota Corolla Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...