Question about 2003 Mazda Tribute

3 Answers

MAZDA TRIBUTE BRAKES

Mazda tribute 3.L 2003 SOMETIMES WHEN I BRAKE IT SEEMS THAT THE ABS CUTS IN . ALSO I CAN TELL WHEN THIS IS GOING TO HAPPEN BECAUSE THERE IS A CLICKING SOUND COMING FROM THE DRIVERS FOOTWELL. AT ALL OTHER TIMES THE BRAKES ARE FINE .I HAVE HAD NO ABS LIGHT COME ON AND WHEN MY MAZDA GARAGE PLUGED IN THERE PC IT COULD NOT FIND A FAULT. I THINK IT MIGHT BE THE ABS RELAY PLAYINY UP BUT IDO NOT KNOW WHERE TO FIND IT .
PLEASE CAN YOU HELP.

Posted by on

  • stephentu621 Jan 02, 2009

    there was no advice dated 31.12.08

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

You most likely have a wheel sensor dropping out and showing o mph this would make abs think one wheel locked up and activate unit. would not set a code because system thinks it is doing its job. need to have a scanner on it and read data when driving. does it do this at lower speeds? if so i bet they will see a speed sensor drop to 0 then abs kick in

Posted on Dec 31, 2008

  • TripleTauto
    TripleTauto Dec 31, 2008

    junoon if you dont know how to fix please dont answer with a copy paste answer!!!

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 359 Answers

If this is happening on bumpy roads it is normal

Posted on Jan 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Click this link

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cost to fix 2006 Mazda tribute differential


ABS does not say differential that will be the brakes

Feb 28, 2015 | 2006 Mazda Tribute

1 Answer

Location of abs pressure switch on 2003 mazda tribute


probly in the abs module-which is in the brake fluid line--a new module can cost 3000--if the fluid is dark changeit cause it destroys the modules--remembr u can stil brake w out antilock

Nov 12, 2014 | 2003 Mazda Tribute

1 Answer

ABS light on, flashing 4wd 2005 Mazda Tribute


Even though your anit-lock brake system light comes on, dosen't mean your brakes will not work. All the ABS does, when applying the breaks, it compensates breaking power like pulsating your pads off and on the rotor in which without ABS your doing the same thing manually by pressing n releasing the brake pedal. And usually half the time it's a sensor that goes out and can be checked at your local autozone or auto parts store where they can plug into your car and will display a code that pertains to your ABS problem. Hope this helps.

Oct 16, 2012 | 2005 Mazda Tribute 3.0s

1 Answer

Adjust rear brakes on 2001 mazda tribute dx


Adjustments BRAKE SHOE ADJUSTMENT
  1. Remove the brake drum.

89219140


  1. Using the special tool, measure the inside diameter of the brake drum.

89219141


  1. Position the special tool on the brake shoes and linings and adjust accordingly.
  2. Install the brake drum.




Oct 07, 2011 | 2001 Mazda Tribute

1 Answer

On my 2006 mazda tribute, the abs light came on, wnet off and came back on again. the car has plenty of brake fluid. . .what could be wrong?


Hello and thanks for the question,
The anti lock brakes system is somewhat complex. There are many reasons as to why the ABS lamp flashed on and the back off ( ie. Wheel speed sensors, relays, poor power supply, bad grounds). There's really no other way of telling without haveing the codes retrieved from the ABS module( computer).

Jun 15, 2011 | 2006 Mazda Tribute

2 Answers

Abs light is on and 4wd light comes on and off


2006 Mazda Tribute, ABS braking lights on,Why?
While driving the ABS light comes on and stays on and when I apply the brakes it kinds of shakes a bit.
How to fix this problem?

May 30, 2011 | 2006 Mazda Tribute

1 Answer

MY BRAKE LIGHT IS ON IN MY CAR. WHAT DOES THIS USUALLY MEAN? LOW BRAKE FLUID? 2001 MAZDA TRIBUTE


Typically this may due to low brake fluid or the parking brake not disengaged completely. If you do find the your brake fluid level is low you may want to have your brakes inspected as this may be an indication that your brakes are worn and may need replaced.

Feb 11, 2011 | 2001 Mazda Tribute

1 Answer

2005 mazda tribute....abs problem


a speed sensor on the front,have the ABS system scaned for the codes(this will show you wich sensor is bad)

Sep 08, 2009 | 2005 Mazda Tribute

2 Answers

Intermittent braking problem


yeah you mostlikey have a abs pressure switch problem. which helps in the power assist , and or the seal in the brake booster is going bad

May 27, 2009 | 2003 Mazda Tribute

Not finding what you are looking for?
2003 Mazda Tribute Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...