Question about 2002 Hyundai XG350

2 Answers

HYUNDAI XG350 WINDSHIELD WIPER WILL NOT COME ON AFTER BEING FROZEN TO WINDSHIELD

Posted by on

  • 2 more comments 
  • skhwang99 Jan 27, 2009

    I have the same problem.

  • mitch821 Mar 31, 2009

    I have the same problem...and its raining right now...there is no clicking from the relay in the fuse box...need help!! I'll check the bolts!

  • mitch821 Mar 31, 2009

    The bolts were tight already, I tightened them a little more, got the wipers to move. Had the wipers on the whole time to see if maybe something would jar it, wipers never tried to move. any more suggestions??

  • Anonymous Mar 26, 2014

    Tighten windshield wiper nut

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try tightening the bolt that connects the wiper to the car.

Posted on Jan 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Is the motor making any noise at all? It is possible the bolts came loose and just need tightened. Please give some more info.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Hyundai xg350. Wipers quit working. What steps do i take to see if its a motor or fuse etc.?


Search Results

    02 XG350 air, sunroof, seat warmers, and intermittent wipers quit ...

    www.hyundai-forums.com/.../149142-02-xg350-air-sunroof-seat-warme...

    Sep 27, 2012 - 9 posts - ‎5 authors
    An automotive shop pulled up the car and said their was a fuse box with a lot of relays in it on the passenger compartment .... 2004 XG350L .... Same thing happened to me, 2002 XG350, sunroof, blower, vanity light all out.

    Hyundai XG350 wipers not working Questions & Answers ...

    www.fixya.com > ... > wipers not working > Cars & Trucks > Hyundai
    Hyundai XG350 cars & trucks wipers not working questions and answers. Ask your Hyundai wipers not working related question. ... 2004 Hyundai XG350.

    Hyundai wipers not working Questions & Answers - Fixya

Dec 03, 2015 | Hyundai Cars & Trucks

1 Answer

2007 hyundai elantra wiper motor runs but no fluid comes out


if you live in the same type of area I do "cold" you might have a frozen washer bottle.. get the vehicle into a nice 60 degree f shop for a few hours.. if that doesn't work you need to get to the bottle behind the right front fender and blow through the lines "after draining the bottle" this solvent is poisonouse. www.hmaservice.com might help you with this is the sight I use when I need the technical info to fix these cars..

Feb 10, 2014 | 2007 Hyundai Elantra Limited Sedan

1 Answer

Windshield wiper stopped working


arm/linkage came loose.. its at the base of the windshield..

Dec 30, 2013 | Hyundai Cars & Trucks

1 Answer

2007 hyundai entourage windshield wiper motor linkage?


While I was changing out struts on my 2007 Entourage, I had to remove the wiper motor. It was easy to do it, 4 - 10mm bolts and it was out.

Getting to the motor took a little more work but is not impossible. You have to remove the windshield vent cover (not sure what it's called), it's located at the bottom of the windshield, and when the hood is up, you can remove the wiper arms and those trim pieces and get to the motor easily.

This is a good general video that will show you how to roughly remove everything, granted this is a strut replacement video, but the beginning is what would be important to you: http://www.youtube.com/watch?v=UpSIv3mk98k
Hope that helps!

Mar 08, 2013 | 2007 Hyundai Entourage Limited Minivan

1 Answer

Driver's side windshield wiper has stopped and i can still hear the motor working but it is not moving the wiper. i can get the nut off on the arm to remove the wiper but after that i cannot get the...


Hyundai started using plastic washers to hold down wiper arms. This is to prevent damage to the wiper transmission in cases where the wipers are either frozen to the windshield or trying to push too much snow/ice. To remove the wiper arm, you will need to locate the washer and remove it first. Chances are the washer will be the only part you need to replace.

May 19, 2011 | 2001 Hyundai Elantra

1 Answer

The windshield wipers wont go back into position


Hyundai uses plastic washers in their windshield wipers to prevent wiper transmission damage due to excessive force ie trying to use them when they are stuck to the windshield. There's a small hinged "cap" at the base of each wiper. Flip the cap up and using a pair of pliers, tighten down the bolts. Be careful not to overtighten them or risk doing damage to the washers. If this doesn't solve your problem, you may need to replace the washers beneath the nut that connects to the wiper transmission.

Feb 15, 2011 | 2009 Hyundai Elantra

2 Answers

Windshield wiper doesnt work


hii..ya u have to replace it with the new
one.Since it is frozen u can't do anything
with that.once u replace it with the new one
it will start working.Other than replacing the
wiper u have nothing to do.
thank u..

Feb 05, 2009 | Pontiac Safari Cars & Trucks

2 Answers

Windshield wiper fluid wont come out..


It does not take very much dirt in the washer fluid reservoir to plug the nozzles for the windshield washers. check for dirt in the reservoir and clean out if need be. If you are in below freezing temperatures make sure your washer fluid is good for below freezing. mike

Jan 05, 2009 | 2006 Hyundai XG350

Not finding what you are looking for?
2002 Hyundai XG350 Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...