Question about 1998 Chevrolet Monte Carlo

1 Answer

My tail lights and dash panel lights don't work

I can't figure out which fuse I need change

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Get a test light and check all the fuses. With the older Chevies the dash lights and tail lights use the same fuse. You can check all the fuses by touching the test light to each side of the fuse. If there is power to one side and not the other(of the same fuse) that tells you that there is energy getting to it but not coming out of it. Replace the fuse. If there is no power to the fuse at all that means that you haven't powered it up. Sometimes you have to activate power to the fuse by turning that device on.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake lights work but my tail lights and reverse lights don't work. Also my dash lights quit when I changed the switch for my headlights.


Check your fuses. I had the same problem with a 90 Honda civic. Dash lights went out, tail lights also went out. Replaced 1 fuse and all came back on.

Jan 11, 2013 | 1996 Dodge Neon

1 Answer

Part of the lights on the dashboard lights on one side and the other side don't light on


Check the tail lights if they are noe working check the fuse marked 'tail" in the fuse panel at the left lower dash replace this fuse, it also powers the dash lights.

Sep 14, 2012 | 2003 Toyota ECHO

1 Answer

Tail lights and dash lights don't work


You should check all the bulbs and your wiring circuit for fuses outside the fuse box, such as in line fuses.

If you need ECU chip tunnig, welcome to Allobd2.com

Jul 02, 2012 | 1996 Mercury Mystique

1 Answer

Dash lights and tail lights don't work


Lights and electrical circuits are sometimes in pairs so that you notice something is wrong (tail lights and dash). On a '90 merc grand marq., that would be fuse #4,the 15 amp blue one, in the panel next to your left foot. If you are lucky,it
just failed from age. If you are not lucky, there is a short in the system containing
the dash, tail,parking,side marker, license lamps and trailer tow relay if equiped.I had to replace the push/pull main light switch which was shorted. If you are lucky, just replacing the fuse in the panel will do it. Referance Grand Marquis Owners Manual for fuses and function.

Apr 12, 2012 | 1990 Mercury Grand Marquis

1 Answer

Tail lights don't work on 83 cutlass supreme


I assume you checked the bulbs and they were good? It's possible that the sockets have gone bad and need replacing. The tail lights are fused through the instrument panel lights. that fuse should be in the middle of your fuse box, marked "instr". If the fuse is good check to see if the dash lights come on when you turn the headlight switch on. If they don't then change the headlight switch. hope this helps.

Mar 12, 2012 | 1983 Oldsmobile Cutlass Supreme

2 Answers

Dash lights don't work 1992 jeep wrangler


try turning the headlight knob left to right several times, and jiggle the switch at night. Also check your fuse panel should be a 10 amp or less fuse that says "Insr" or something like it.

Nov 11, 2011 | 1992 Jeep Wrangler

1 Answer

I have an 01 ford Powerstroke and the dash lights and tail lights dont work. i just replaced the headlight switch today. Still have the problem


Dash lights and tail lights are commonly on the same circuit. When your dash lights go out, you know you don't have any tail lights. Pull out the owner's manual and figure out which fuse (or fuses) are for the tail lights.

Sep 19, 2011 | 2001 Ford F350 Super Duty SuperCab

2 Answers

Need to replace the turn signal flasher. the dash lites & tail lights don't work.


It is located behind the fuse block on the driver's side. When you open the drivers door you can plainly see the fuse block. (marked "FUSES") Flasher is behind that. You have to get to it from under the dash. Take out panels under steering wheel. If you get your head down by the brake pedal you can see it.
When someone changed theirs, they took out the little bracket that holds it in and relocated it to a lower place - they clipped the flasher bracket onto the little access door closest to the emergency brake (on the panel that you have to take out). Luckily the wires were long enough to enable this, so if you have to change it again, it's a lot easier.

May 10, 2011 | 1995 Pontiac Grand Am

2 Answers

Ford focus station wagon looking for where tail light fuse is


There are 4 fuses you would need to check in the interior fuse panel.
The first one is fuse no.32(10amp) then check no. 33 (15amp) then no. 59 (7.5 amp) and no. 61 (7.5 amp)

Mar 04, 2009 | 2000 Ford Focus

Not finding what you are looking for?
1998 Chevrolet Monte Carlo Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...