Question about 1999 Dodge Ram

1 Answer

DODGE RAM 2500 RAM 4X4 1998 5 SPEED, CLUTCH WILL NOT RELEASE

IF I PUMP THE PEDAL IT WILL LET ME PUT IT IN GEAR. I HAVE BEEN IN EXTREEM COLD WEATHER WHEN THIS PROBLEM STARTED. THE TANK IS FULL AND THERE APPEARS TO BE NO LEAKS

Posted by on

  • Anonymous Mar 23, 2009

    I have the same problem. Started in cold weather seems to be less pronounced the warmer it is. I'm trying a new master & slave. Two trustworthy mechanics, say it is in the cluthch itself. Weak fingers or not releasing of the fly wheel. Curious if you found what was wrong

  • kevin carpenter May 11, 2010

    how many miles do you have the clutch, ? have you tried bleeding the slave cyclinder ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

You may have a faulty or weak clutch master and or slave cylinder

Posted on Jan 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have replaced 5 speed transmission everything is new clutch pressure plate a truck will shift while turned off and will not shift in gear while running whats wrong


Is clutch release linkage working? Installing clutch disc backwards will do this too. With engine off, put in gear, depress clutch pedal and turn engine by hand to see if clutch is still dragging.

May 20, 2016 | Cars & Trucks

1 Answer

2004 dodge ram 1500 with the 3.7L V6 5 speed manual. The truck drives and shifts fine but after driving for a while it won't be able to shift into or out of any gear.


the reason for hard shifting and selection when running is that the clutch shaft ( input shaft) is still turning even though the clutch pressure plate is released
it can be from oil/grease on the fly wheel /pressure plate face causing it to stick when hot
it may be from sticking clutch plate on the splines binding when hot
or it could be a dry spigot bush or failed bearing in the end of the crankshaft that positions the clutch shaft
check the pedal height adjustment and the position it is from the floor when starting to engage
It may be adjustment under the dash

May 18, 2015 | 2004 Dodge Ram 1500

1 Answer

1986 dodge clutch trouble


redo assembly for clutch as the gears on put back right.

May 03, 2014 | 1986 Dodge Ram Wagon

1 Answer

Clutch pedal snaps all the way to the floor


Your car has a hydraulically operated clutch release system, it has failed, see a local shop to repair it, cost is about $500.00

Sep 04, 2012 | Cars & Trucks

1 Answer

Getting error code P0 740. what does this mean?


In the '96 Factory Service Manual, it says code P0740 is "Torq Conv Clu, No RPM Drop At Lockup" (Relationship between engine speed and vehicle speed indicates no torque converter clutch engagement).

When I lived in a cold climate (MT) had a JGC,V8, with a trailer towing option that didn't shift correctly in cold temps. The problem was corrected with a TSB that bypassed the tranny cooler @ cold temps.

I've seen several cold weather TSBs having to do with Dodge transmissions at the following: http://dodgeram.info/tsb/group_21.htm

Hope helped.

Mar 09, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

2002 dodge diesel 2500 5 Speed....... Clutch will


if master cylinder and slave cylinder.is good and have brake fluid is in system and no leaks.problem is in the clutch and pressure plate.

Jun 10, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

When in gear drive


SOUNDS LIKE THE TORQUE CONVERTER CLUTCH IS NOT DIS-ENGAGING.

Mar 15, 2009 | 1994 Dodge Ram

1 Answer

99 Dodge Ram 1500: Engine starts but then immediatly dies.


Sounds like a fuel issue. If it only does it when it's cold try putting some heet in your tank?

Jan 21, 2009 | 1999 Dodge Ram

1 Answer

Clutch


If its a hydrulic clutch check the fluid and fix the leak if its low.
If its a cable clutch its likely that the clutch is worn out and needs to be replaced

Oct 26, 2008 | 1995 Dodge Ram

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...