Question about 1992 Audi 80

1 Answer

Brake bleeding just changed rear pads on audi 80. what order do i bleed the brakes? if there is one. happy new year

Posted by on

  • yadayada
    yadayada May 11, 2010

    Do U have ABS?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Start with the farthest from the master cylinder.
passenger side then driver.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a F150 p/u 2000 for 10yrs. Each year I change the brake pads. But the rear pads still looks like new. The front pads are worn down. What can be causing the problem?


normally, you replace the rear brake pads every other change in the front brake pads. for your case, it seems that the front brakes are the only ones working.

bleed your brakes to check if rear brakes are still working. after bleeding, check your brake master if it puts pressure equally to the 4 brakes.

Aug 05, 2011 | Ford F-150 Cars & Trucks

1 Answer

Changed both front (rears are drums and did not change) brake calibers and pads on my 1998 F150 pickup 2 wheel drive. In doing so I let the master cylinder go empty. How do I bleed the brakes now. I have...


your probably going to have to bleed the entire system.1st try & bleed the master cyl.
basicly the same as you would bleed the front/rear brakes. pump pedal & hold while someone
loosen the brake line on the master cyl. after m/c is bleed move to r/r,l/r,r/f,l/f wheels in
that order. if you have abs brakes & you got air in the pump a scan tool may be needed
to bleed properly.

Jul 17, 2011 | Ford F-150 Cars & Trucks

1 Answer

Video for replacing front brakes pads and rotors on a 2004 ford e


Hello,
ccr20011001bb00.jpg Brake Bleeding
Purging air and moisture from your binders
CarCare - Maintenance - Brakes

ccr20030701as00.jpg ABS Speed Sensor Service
A clean sensor is a happy sensor
CarCare - Maintenance - Brakes

ccr20030701db00.jpg Drum Brakes - Rear Brake Drum Adjustment
It's stupid not to adjust your rear drum brakes
CarCare - Maintenance - Brakes

ccr20050201rr00.jpg Replacement Rotors
Friction, brake rotors, and you
CarCare - Maintenance - Brakes

ccr20050501pb00.jpg Power-Bleeding Brake Systems
Air today, gone tomorrow
CarCare - Maintenance - Brakes

ccr20050701bp00.jpg Replacing Brake Pads
How to replace worn pads
CarCare - Maintenance - Brakes

ccr20071101bs00.jpg Bleeding Power Steering
Getting rid of that air in there
CarCare - Maintenance - BrakesThanks

May 29, 2010 | 2004 Ford Escape

2 Answers

Brakes go to floor changed master cylinder to no avail still to the floor


ok there are a few things you need to check.. you said you changed the master cylinder.. did you bleed the braking system after???

  • remove from wheel,,
  • locate bleed valve on caliper / or unscrew one of the lines
  • pump brake and push right down and hole,,
  • repeat plugging the lines with your finger ,,
  • repeat the above 2 steps a few times
  • tighten the bleed screw while holding the brake right down..
if that fails ...

if that fails try adjusting the brake up.. its on the rear tires,, remove one and them remove the shield protecting the brake shoe,, see the turn bolt that adjust the pistons,, adjust that a bit until the brake is in the desired position..

check your disc pads to see if its wron out..

check your booster / change it..

Apr 23, 2010 | 1989 Mazda 626

2 Answers

How do I bleed the front brakes on a 2004 audi a4 quattro?


For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!! For front brake pads. First you must verify yours front brake disc diameter: 280 mm or 288 mm. (On my car y have 288 mm). After that you can buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow: 1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose! 2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper. 3. Now you must thoroughly clean the brake calipers (free of grease). 4. Remove outer brake pad from brake carrier. 5. Pull inner brake pad out of brake caliper piston. 6. Check up the brake fluid level on the reservor, and emptying if neccessary! 7. Push piston back into brake caliper housing. 8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward). 9. Install outer brake pad into brake carrier. 10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm. 11. Install both caps. 12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Oct 01, 2009 | 2004 Audi A4

1 Answer

I need to know how to replace front break pads on a 1999 audi A6 2.8 quatto


www.ehow.com/how_4819517_change-pads-rotors-audi-quattro.html

go to this web site and it will walk you through how to change your pad.
its good ideas to also have your rotor turn, will help reduce any vibration and the new pad will last allot longer.

www.helium.com/items/1359058-how-to-bleed-brakes-abs

go to this site to bleed your brakes, only if had to open a bleed valve to release the caliper pressure to push the piston back in.

Sep 25, 2009 | 1999 Audi A6

2 Answers

Brake bleeding audi 80 1992


right rear, left rear, right front, left front. (left hand drivers side)

Dec 31, 2008 | 1992 Audi 80

2 Answers

Bleeding brakes


check to see if this car has a brake equilisation valve in the line somewhere, as they normaly stick when there has been a fluid loss at the rear of the vehicle. this brake presure protection valve shuts off the fluid coming to the rear brake after there is no resistance in the rear line to keep from loosing all brakes entirely.

Nov 06, 2008 | 1998 Audi A4

1 Answer

Brake pad replacement


You will need to bleed all four corners, starting at the right rear, then left rear, then right front, then left front. Your bleed procedure always goes from the wheel farthest from the master cylinder, to the closest. By bleeding only the rear brakes, you've gotten air out back there, but not necessarily any air that might have moved farther forward. Bleed your rears again, and then move forward to bleed the fronts, and see if that helps.

Aug 31, 2008 | 2003 Audi A4 Cabriolet

1 Answer

I want to replace the rear disk pads on my a-6 Quattro 3.0; can I safely use one of those compressor kits from a parts place to compress the pistons, any tricks to share ?? and anything to worry about...


I have taken the brake caliper of the rear passenger side and renewed the seals in it i have also renewed the brake pads in that wheel i have tried to bleed it before renewing the pads in the outherside but when i open the bleed nipple and push the peddle down there is no braked fluid coming out i also renewed the nipple.When you take the brake pipe off the caliper ther is still no fluid coming out also there is no pressure on the pedal 1997 audi a4 1800

Jul 26, 2008 | 1998 Audi A4

Not finding what you are looking for?
1992 Audi 80 Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...