Question about 1996 Ford Explorer

1 Answer

Oil comming out of air intake

I have a 96 ford explorer i did the head gaskets about a 1000 miles ago
then on a trip the valve cover gaskets blew out and leeked oil. i fixed them and they heald but now im getting smoke out of exaust (white) not alot . also oil in my air filter. please help thank you for your time

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 120 Answers

Replace your pcv valve. this should fix it.

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 91 honda prelude is leeking oil and its smokes when hot but cant figure out where its leeking from


easiest way is to get the dye and poor it into your engine. Then with the dye light you will be able to track the source. On those years the most likely spot was the intake manifold gasket and valve cover gasket. You also could have a blown head gasket that only blew on a oil intake side, doesnt mean that you would over heat

Mar 03, 2015 | Honda Cars & Trucks

2 Answers

I have a honda dx 1987 it starts up blowing blue smoke we replaced the valve seals and gaskets


In order to get the best gas mileage the Honda motors only have one compression ring and a oil control ring on the pistons. If the oil wasn't changed regularlly then it's time for rings after about 120 thousand miles. they all use a little oil because of this one ring system, about a quart in 1000 miles, even when new. When doing your work did you clean the valve cover real good? the cover has the baffles for the oil control of crankcase blowby and as they fill up with carbonized oil the baffles in the valve cover instead of separteing the air and the oil start passing oil into the PCV systema and into the air cleaner and into the air entering the air intake of the engine gets burned in the combustion gases and out the tailpipe.

Mar 08, 2011 | Honda Accord Cars & Trucks

3 Answers

Water in oil


possible intake manifold gasket leaking into engine

May 13, 2010 | 1992 Ford Bronco

1 Answer

99 ford running rough


If it's dead in cylinder one then it could be a burt valve to find out for sure all you do is put it up on top dead center of the compression stroke and pull the spark plug out and apply air to that cylinder, You can remove the air cleaner and the radiator cap so that where ever the air comes out thats where your problem is, if it comes out the intake its the intake valve if it's comming out the exhaust pipe its you exhaust valve if it blows bubbles out of the radatior then it's the head gasket, if it comes out of the rocker arm cover then it's the rings.

Nov 13, 2009 | 1999 Ford Expedition

1 Answer

'96 explorer burning oil


how much oil is burning and have you checked for leaks. with those miles its bound to burn small oil

Aug 19, 2009 | 1987 Ford F 150

1 Answer

I need a diagram of a 1995 ford escort engine


96 escort 1.9L

bb97132.gif
e0d7524.gif

Engine Components
Item Part Number Description 1 6766 Oil Filler Cap 2 6A548 (8 Req'd) Valve Cover Bolt 3 6582 Valve Cover 4 — Exhaust Manifold Shield-to-Exhaust Manifold Nut (4 Req'd) 5 9A462 Exhaust Manifold Shield 6 — Exhaust Manifold Shield Stud (4 Req'd) 7 9430 Exhaust Manifold 8 9454 Exhaust Manifold Nut 9 9448 Exhaust Manifold Gasket 10 — Exhaust Manifold Stud (Fine Thread), Short (4 Req'd) 11 — Exhaust Manifold Stud, Long (1 Req'd) 12 — Exhaust Manifold Stud (Medium Thread), Short (1 Req'd) 13 6518 Valve Spring Retainer Key 14 6514 Valve Spring Retainer 15 6513 Valve Spring and Damper, Intake 16 6C515 Valve Tappet Guide Plate Retainer 17 6571 Valve Stem Seal 18 6513 Valve Spring, Exhaust 19 12405 Spark Plug 20 6269 Camshaft Thrust Plate 21 — Camshaft Thrust Plate Bolt (2 Req'd) 22 — Cup Plug 23 6B273 Camshaft Oil Flow Control Rod 24 6K292 Camshaft Front Seal 25 6256 Camshaft Sprocket 26 6278 Camshaft Sprocket Washer 27 6K252 Camshaft Sprocket Retaining Bolt 28 6L269 Camshaft Sprocket Key (5 x 18) 29 6250 Camshaft 30 6051 Head Gasket 31 6A008 Cylinder Head to Block Dowel 32 6010 Cylinder Block 33 6507 Intake Valve 34 6505 Exhaust Valve 35 6049 Cylinder Head 36 — Intake Manifold Stud (7 Req'd) 37 17A084 Engine Lifting Eye 38 — Engine Lifting Eye Bolt (2 Req'd) 39 9439 Intake Manifold Gasket 40 — Bolt 41 9723 Accelerator Cable Bracket 42 9424 Intake Manifold 43 — Intake Manifold Nut (7 Req'd) 44 9D476 EGR Valve Gasket 45 — Exhaust Gas Recirculation (EGR) Valve Bolt (2 Req'd) 46 9D475 EGR Valve 47 — Fuel Injection Supply Manifold Bolt
(2 Req'd) 48 9F593 Fuel Injector 49 9D930 Fuel Charging Wiring 50 6786 Oil Level Indicator Tube Bracket 51 — Oil Level Indicator Tube Bracket Bolt 52 6754 Oil Level Indicator Tube 53 6750 Oil Level Dipstick 54 9D280 Fuel Injection Supply Manifold 55 — Vacuum Fitting 56 9E498 Main Emission Vacuum Control Connector 57 — Vacuum Tap 58 — Vacuum Hose 59 9B989 Throttle Position Sensor 60 — Screw and Washer 61 9F782 Throttle Position Sensor Gasket 62 — Throttle Body Bolt (4 Req'd) 63 — Idle Air Control (IAC) Valve Bolt
(2 Req'd) 64 9F715 Idle Air Control Valve 65 9F670 Idle Air Control Gasket 66 9E926 Throttle Body 67 9E936 Throttle Body Gasket 68 — Vacuum Fitting 69 — Camshaft Position Sensor Screw 70 6B288 Camshaft Position Sensor 71 8255 Water Hose Connection Gasket 72 — Water Hose Connection Bolt (3 Req'd) 73 8592 Water Hose Connection 74 8575 Water Thermostat 75 6065 Cylinder Head Bolts 76 6500 Valve Tappet 77 6K512 Valve Tappet Guide Plate 78 6564 Rocker Arm 79 6A528 Rocker Arm Seat 80 6A527 Rocker Arm Bolt (8 Req'd) 81 — Ignition Coil Mounting Bracket Bolt
(3 Req'd) 82 18827 Noise Filter Condenser 83 — Ignition Coil Mounting Bolt (4 Req'd) 84 12259 Spark Plug Wire Set 85 12029 Ignition Coil 86 12043 Ignition Coil Mounting Bracket A — Tighten to 5-12 Nm (4-9 Lb-Ft) B — Tighten to 5-7 Nm (3-5 Lb-Ft) C — Tighten to 21-26 Nm (16-19 Lb-Ft) D — Tighten to 2-10 Nm (1.5-7 Lb-Ft) E — Tighten to 8-13 Nm (6-9 Lb-Ft) F — Tighten to 40-55 Nm (30-41 Lb-Ft) G — Tighten to 16-20 Nm (12-15 Lb-Ft) H — Tighten to 20-30 Nm (15-22 Lb-Ft) I — Tighten to 8-10 Nm (6-8 Lb-Ft) J — Tighten to 8-11 Nm (6-9 Lb-Ft) K — Tighten to 23-30 Nm (17-22 Lb-Ft) L — Tighten to 20-40 Nm (15-30 Lb-Ft) M — Tighten to 4.5-7 Nm (3-5 Lb-Ft) N — Tighten to 18-26 Nm (13-19 Lb-Ft)

Feb 24, 2009 | 1995 Ford Escort

1 Answer

96 3.0L taurus idles rough other wise runs fine. Head gasket was replaced 7000 miles ago


Intake gasket leak. Vaccum leak. Best way to find out is to put a vaccum guage on the intake and see if it steady at idle if not look for leaks. Map gas around the take from a torch will sometimes help you locate the leak. If there are multiple leaks it may not.

Jul 30, 2008 | 2003 Ford Explorer Sport Trac

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...