Question about 2001 Chevrolet Silverado 1500

1 Answer

No brake lights ,fuse is good,brake switch checks good. 1998 chev

1998, 1500 chevy truck

Posted by on

  • jmac497 Dec 31, 2008

    is there a relay in circuit besides the park relay

  • jmac497 Dec 31, 2008

    everything works but brake lights

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Have you Checked the Harness under the Rear of the Bed for the Tow Package? These Truck usually have the Plug Harness installed from Factory and can sometimes come Undone.

Posted on Dec 31, 2008

  • Travis Humphries
    Travis Humphries Dec 31, 2008

    Should be a Relay in the Under Hood Fuse Box for the Lights, Brakes, ETC. I would check there first. Let me Know what you Find!

  • Travis Humphries
    Travis Humphries Dec 31, 2008

    Ok The next step is to get a Voltmeter From any auto Parts Stor and Start Searching through Wires Starting from the Brake Lights Back to the Fuse Box. I know it is Time Consuming and Frustrating But, That is all that I can Think of from this Point. Just helped a Lady this Morning and it Worked. Keep me Updated!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy express van, no brake lights; left, right and above rear door. Tail lights good and signals all work.


probably a fuse. if the fuses are good check the brake light switch on the brake pedal.

Mar 10, 2014 | 1998 Chevrolet Express

1 Answer

1988 chevy 1500 everythingworks exept brake light turn signal ok tailghts ok no brake lights


Since the turns work in the back, that means the brake bulbs are good. Brake lights and turn signal lights share the same filament in the bulb.
There is a fuse for the brake lights. Then, there is a brake light switch on the brake pedal. You need a voltmeter or test light, after checking that fuse is good. Need to check if fuse has power on it. This is one of those fuses that are hot at all times-as long as battery is connected, voltage should be going through the fuse and up to the brake light switch. Check for power both places. The switch on the pedal is a simple on-off switch. When brake is depressed, the spring loaded switch is turned on-passing power on towards the brake lights.
But then the brake wire goes into the turn signal switch before going on to the brake bulbs...however, since your turns work good, I doubt if there is a problem in the turn switch. First check if the brake light switch is sending power on when switch is on.
Let me know what you find. Good luck.

Nov 27, 2013 | 2000 Ford Focus

1 Answer

1988 volkswagen golf gt light problems. The low beam headlights do not work along with brake lights and reverse lights. Bulbs are good and all fuses are good. No power to any of the bulbs. I think it has...


Same thing as the Chev. Check the dip switch on the combination switch. Also sheck reverse light switch by removeing the connector and jumping. Do the same check for the stop lights be it pressure or contact switch.

Oct 05, 2011 | 1988 Volkswagen Golf

1 Answer

Can't get 1998 Chevy Pickup 1500 out of part also has no back up lights. Have already replaced brake switch and Park Neutral Safety switch but still have problem. Any advice?


Have you checked to see if the fuse is blown? The brake lights have to work to get the truk out of park as thepower from the switch opens the gate in the steering colum to let the shifter into gear.the brake light fuse is in the underdash fuse panel. while checking fuses check them all as some circuits effect others so any blown fuse can cause this problem eventhe fuse panel under the hood. The tailight circuit boards are well known to fail and cause blown fuses so unplug the tailights at the light change the fuse and try to ge it out of park If it works plug one at a time the tailights in and you'll find your problem the circuit boards are a common problem so they can be aquired at most parts stores.

Mar 01, 2011 | 1998 Chevrolet K1500

2 Answers

Fuse good told that brake electric wire bad. what


There is a "Switch" that is pressed by your Breaking foot lever of most vehicles. Grab a flashlight and look for it, Turn the key on and see if you get any voltage to this switch. If you do get voltage to this switch, have someone watch the break lights while you jump the 2 wires. If you have power to it and jump it but still no lights, You must replace the faulty wiring.

Jun 04, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

94 chev pickup, no brake lights, I replaced the brake switch.


First check the fuse, if ok start checking the wiring from the fuse to the sockek of both lights, if ok check the ground. All this is provided you have the new switch adjusted properly.

Mar 31, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

2004 chevy 1500 brake lights not working


check fuse under hood, batery terminals coroded wire at harness if everything fails run a hot wire to rear brake line with an interuptor.
check the swich under the foot brake.
vitally

Sep 09, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Day time running lights on a 1998 chev c1500


Ck around the emergency brake. There should be a switch that when the e brake is applied it will cause the lights to go out. Also ck all wire connections and ck that the wires havent been cut by someone who felt like they did not need/want them, and finally have you ensurred the blubs were good?

Feb 18, 2009 | 1998 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...