Question about 1999 Daewoo Lanos

1 Answer

Slipping Clutch The clutch on my 1999 Lanos SE is slipping . Is it easy to ajust ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

If you have a clutch cable thenyou can adjust it. If it's a hydraulic system you need a new clutch.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my clutch is slipping is there away to ajust it and stop it slipping . Iv changed the clutch fluid . And looked at clutch ..


clutch is probably failing, mechanic should be able to advise after inspecting. probably your best bet

May 28, 2015 | Cars & Trucks

1 Answer

Ajust the clutch on a nissannote n_tec 1.4 09 can't see any ajuster


most modern cars do not have an ability to adjust the clutch rod in the slave cylinder
if it is slipping then it most likely be a blocked compensating port on the clutch master cylinder holding the pressure plate off
If it is going too far down or only coming up a bit to engage then there is probably air in the system that needs to be led out.
before you waste money pulling the box to replace the clutch ,have it diagnosed at an accredited clutch specialist shop

Feb 25, 2015 | Cars & Trucks

1 Answer

Daewoo


I assume you mean the clutch is slipping I have heard that the pressure plates on this auto have been really sloppy and tend to slip after 15,000 miles could also be that the flywheel has become glazed by some oil getting on it. If that's the problem easy fix use some really fine sand paper and clean it up

Jul 21, 2014 | 2000 Daewoo Lanos

1 Answer

Have a problem no power when in gear from clutch slipping


Hi this sounds like the clutch is slipping , the cause could be a worn out friction plate commonly known (clutch plate) or it could be contaminated with oil either via a leak at the rear main seal or the transmission spigot shaft seal , it is best to replace the entire clutch kit , have a technician check the freeplay of your clutch pedal as a point of depature.
Hope this helps a bit,
Faldih Higgins
Automotive Diagnostician at Autocom SA.

Jul 21, 2014 | 2000 Daewoo Lanos

1 Answer

How to ajust clutch


there is no clutch adjustment. If it is slipping then the problem may be in the master cylinder compensating port and the fix is a new clutch master cylinder (cheapest fix) or bleed the system first (even cheaper fix)

Jul 15, 2014 | 1999 Mazda 626

1 Answer

Clutch is sleping can it be ajustment.is there do it your self ajusting that will help


Adjustments- if any- are for the throw out bearing
to pressure plate clearance

No adjustment will fix slipping

You may need the flywheel machined & a new
clutch disc & pressure plate

Mar 09, 2013 | 1993 Honda Accord

1 Answer

Is there a way to adjust the clutch on a 99 kia sophia


no they auto ajust as they were if your clutch is slipping you going to need to replace it i would also
recommend replacing the pilot bearing throwout bearing and pressure plate while your in there not to hard to do


if i have help would you mind leaving positive feedback thanks

May 09, 2011 | 1999 Kia Sephia

1 Answer

Clutch on Daewoo Lanos 2000 is not pushing down to floorboard not enough clutch to engage gear. What can I do


fit a new clutch ,its easy on these cars to do and including a tea break should not take more than 3 hrs to do even by the most inexperianced mechanic

May 30, 2010 | 2000 Daewoo Lanos

1 Answer

Have a 99 lanos-clutch


As long as it does not slip (eng speeds up, but car doesnt) you MAY have a clutch hydraulic problem. Ck that first. If the clutch hydraulics are OK then the only thing that could do that it a pilot bearing bad (seizing) but I dont think that is your problem.

Apr 25, 2010 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...