Oil pressure gauge and light and chime come on no top end noise but now top end chatter wtf
SOURCE: oil pressure fluctuating
The sensor could be failing to read the lower pressure when the engine RPM slows down. Or the pump could be failing. I would replace the sensor and see if that doesn't correct the problem
SOURCE: The oil pressure gauge drops to zero for about 3
Two things could be low on oil, or the pick up screen to the oil pump is starting to get clog, I have seen this a few time's on this type of truck here at my repair shop.
SOURCE: 4.7 liter oil pressure gauge malfunctioning.
Check or replace the oil pressure sending unit.
SOURCE: check gauges and no oil pressure in 03 ram hemi 4x4
Had the truck the truck to the shop and they said it was the sensor. I had it replaced and it hasn't screwed up since. If you search out this problem on the net, this is a problem with engine and its oil pressure sensor. Apparently, Chrysler is aware of the problem.
7,625 views
Usually answered in minutes!
Ive got a 5.7 hemi 07 check engine light came on through a code sayn oil pressure to low but the oil light never came on so its the. Sensor going bad
I also have a 2007 5.7 hemi with the same issue.ive been told there is a screen beyond the oil sensor that may be clogged with debris,but I'm having trouble searching where this supposed screen is......
×