Question about 1989 Plymouth Voyager

1 Answer

1989 Plymouth Voyager, no spark and changed the coil, still no spark. Any suggestions or is there a way to find out what the problem is. Everyone says they can't test that old of a vehicle.

Posted by on

  • 2 more comments 
  • stewtlblum Jan 01, 2009

    Thanks, Is the pick up module a separate part or in the distributor cap itself. As you can tell I'm not much of a mechanic. I'm trying to help out a woman who has hardly nothing, she's my neighbor.

  • stewtlblum Jan 01, 2009

    Thanks a million, you have a great New Year too!

  • stewtlblum Jan 01, 2009

    Is the pick up module the same thing as a ignition module? That's all that comes up when I search it.

  • stewtlblum Jan 01, 2009

    Also is there a way to test to see if thats the part before replacing it???

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

If equipped with a distributor cap perhaps your pick up module is not functioning!

Posted on Dec 31, 2008

  • 1 more comment 
  • John Jon Jan 01, 2009

    the pick up module is in side the distributor cap the in the bottom curved switch the only switch with wires in side of distributor! good luck happy new year

  • John Jon Jan 01, 2009

    no pick up is separate from ign module pick up module is under the rotor in distributor cap once spark begins to distribute the "pick up module" picks up the activity but if it can't pick up activity it won't work in harmony and modulate,if you want to test it you will need a volt meter and see if you get any reading but I'm sure this will be the problem! not expensive go to wreckers get a used one for 10 or 20 bucks.

  • John Jon Jan 02, 2009

    did you get it to run now???

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i check my coil pack in my 98 voyager plymouth


Start with starter it is OK,battery and connection,Spark plugs,wires,then coils and fuel filter.module.

May 02, 2013 | 1998 Plymouth Voyager

2 Answers

1989 plymouth voyager has no power going to the coil?


you need to know if it has any codes. your computer needs to know that the engine is actually spinning before it will activate the asd relay which supplies 12v to the coil and injectors, so a failed cam or crank sensor will create this problem

Mar 03, 2013 | 1997 Plymouth Voyager

1 Answer

My 1999 plymouth voyager turns over but wont start


Please post Year, make, model, engine, mileage of your van.

Do you get 'spark' at the plugs?
Check engine control fuse box next to battery.
Timing jump??

Just ideas...

GL

Dec 16, 2011 | 1999 Plymouth Voyager

3 Answers

I need to know where to locate the ignition coil on my 96 Plymouth Grand Voyager.


Follow the spark plug wire's from engine, where the spark plug's are at, to other end of spark plug cable, will plug to ignition coil pack, sits on top of engine.

Sep 17, 2010 | 1996 Plymouth Grand Voyager

1 Answer

1989 plymouth voyager stalls after warm up


you need to check what the fuel pressure is at the reed valve on the fuel rail when it dies,you need at least 50psi

Dec 03, 2009 | 1989 Plymouth Grand Voyager

1 Answer

1998 PLYMOUTH VAN: WE CAN'T GET ANY SPARK, WE


Have you checked the timing belt? If it failed then you wont get the pulse from the cam sensor and no spark. Good luck

Apr 27, 2009 | 1998 Plymouth Voyager

1 Answer

Possible igition problems


mcdevito75 here, Look on the firewall for a white 4 prong reistor, change thisresistor, see if your car starts, if so great, if not, remove the plugs from the resistor and jump them with 2 wires not across the plugs, at the plugs there are 2 connectors with 2 plugs that plug into this resistor, use a jumper wire, any wire between the connections on each plug, seee if the car starts, if so you need a new resistor, if not you"ll have to change the ignition module.

Jan 18, 2009 | 1989 Plymouth Voyager

1 Answer

1996 plymouth wont start


soaked with fuel?....no spark a suspect then..check primary and secondary ignition...plugs wires coil ignitor (distributor) etc

Jan 13, 2009 | 1996 Plymouth Voyager

1 Answer

95 plymouth voyager wont start


does it have fuel pressure? also could be a crank sensor

Nov 01, 2008 | 1995 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...