Question about 1999 Toyota Sienna

1 Answer

Replacing cooling fan assembly 1999 toyota sienna

Is this a failry easy "do it yourself" job?

Posted by on

  • lrpsoteria Dec 31, 2008

    6cyl. It looks like you just take bolts loose. It's on driver side. Doesn't appear to have hoses attached.

  • Kristofergil May 11, 2010

    Yeah may have to drain some coolant to pull the upper radiator hose but i think you can leave the radiator in the car. is it a 4cyl or a v6

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

This is not an involved job. Just remove the bolts, unplug the connectors and slide it up and out.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the rear window glass in a Toyota Sienna van?


take it to a glass repair shop,you probably cant do this yourself,its a pretty tough job

Oct 19, 2014 | Toyota Sienna Cars & Trucks

1 Answer

Replacing right rear tail light assembly of 2004 toyota sienna


For our 2003 Sienna, I removed the two obvious fasteners. I then had to use a screwdriver and gently pry the front part of the assembly away from the quarter panel. This is because there are two hidden pins that insert into plastic grommets near the quarter panel. See this photo which is a top view looking down on the detached assembly. It is a relatively easy thing to accomplish.

Jun 11, 2012 | Toyota Sienna Cars & Trucks

1 Answer

Is there an EGR valve on 01 Jeep Grand Cherokee 4.7 L, and if so where?


The EGR Valve is located on the rear, driver's side of the engine. It's a failry easy job, and you should be able to this yourself.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head. An exhaust gas routing tube connects the EGR valve to the intake manifold.

2010-05-30_173844_1.gif
  • Remove electrical connector at top of EGR valve solenoid.
  • Remove tube mounting bolt at intake manifold.
  • Remove two bolts connecting EGR tube to valve assembly.
  • Remove gasket located between EGR tube flange and EGR valve assembly. 2010-05-30_173909_2.gif
  • Remove two EGR valve mounting bolts.
  • Separate valve assembly from engine.
  • Remove and discard metal gasket located between cylinder head and valve assembly.


Sep 30, 2011 | 2001 Jeep Cherokee

1 Answer

How difficult is it to change out the left rear wheel bearing and the speed sensor on a 2000 toyota sienna?


Front wheel drive. Changing the rear bearings is easy. The speed sensor should be easy as it can be located on the transmission and changed from the outside in most cases. For both jobs I recommend the Haynes repair manual on your vehicle.

Aug 08, 2010 | 2000 Toyota Sienna

1 Answer

Cooling fan will not turn off


The fan motor is bad need to be replaced

Dec 04, 2009 | 1998 Toyota Sienna

1 Answer

1999 toyota sienna replacement the headlight set


Ask the dealer about the lens. That is where 98% come from

Sep 29, 2009 | 1999 Toyota Sienna

1 Answer

Same thing happened to me - 04 Sienna xle


Here is a fix for a 1999 Sienna with a broken door cable.

Aug 19, 2009 | 2004 Toyota Sienna

1 Answer

04 toyota sienna xle driver side sliding door not opening


You need a motor assembly for the power door. It comes with the gears and cables all as one assembly. It requires taking apart the sliding door from the inside. Removing the door panel, door glass, window regulator and motor assembly to gain access to the unit. This is not a job for a novice, and can be a costly repair. Check around for the best price from a place that has experience in Toyota sliding doors.
You cannot just replace a broken cable.

Feb 26, 2009 | 2004 Toyota Sienna

1 Answer

The cooling fan is rubbing and the car over heats it i um plug the fan so how can i fix the fan


The fan shroud may be warped from the heat. If it is you have to replace the fan assembly. Just replaced mine today. Fan was $200 aftermarket. Job was relatively easy after removing the bolts on the long plate that runs over the radiator. Took around 2 hrs to do. -C

Jul 28, 2008 | 1999 Chrysler LHS

Not finding what you are looking for?
1999 Toyota Sienna Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...