Question about 2005 Chrysler Pacifica

Open Question

Chrysler pacifica no sound from radio all fuses check out.

All lights and functions on the radio seem to work including the steering wheel controls. REPLACED THE AMP TWICE still no sound any ideas?

Posted by on

  • lorfo Jan 06, 2009

    This same problem happened to our Pacifica this morning (1/6/09). Radio was working fine, powered off the radio and turned it back on a few minutes later and no sound. All the display functions are working showing that the radio is working.

  • babajalx Jan 19, 2009

    Same problem. Sometimes sound disappears. Fuses are ok, , i have to turn off the engine and turn it on back , sometimes it helps. I think its an amp problem.



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1999 town & country cruise control stopped working

2001 town & country. My airbag/seat belt light came on, cruise control and horn stopped working. Dealer said it was the "clock spring" and usually covered as a recall item.

Posted on Sep 08, 2008

  • 420 Answers

SOURCE: Loss of functionality in all buttons on steering wheel including horn. 2001LS

Check your fuses first, if it isn't a fuse it is not a do it yourself situation. The lincoln stearing wheel has a ton of electronics in it along with the air bag.

Posted on Apr 19, 2009

  • 323 Answers

SOURCE: Check Engine Light

If the light isn't flashing, it is safe to drive. If it is flashing, then catalytic converter damage can result. Have a parts store check the codes for you and come back and post the code.

Posted on May 01, 2009

  • 1348 Answers

SOURCE: Popping sound from Chrysler Pacifica

it is called a clockspring.
the other thing to check is that the rear part of the steering wheel is clearing the column shroud properly.
call a few places in your area and how much it is to change the clockspring.

Posted on May 28, 2009

  • 6927 Answers

SOURCE: 2006 chrysler pacifica-wheel hubs burning hot

The problem might have already been there,the steel wheels are making it noticeable,because they don`t cool down as quick.Most likely is the calipers sticking,or you have a set of high dollar brake pads on the vehicle,and they are heating the rotors up.The high dollar pads are a very hard composite pad witch produce a lot of friction,and heat as a sort of side affect.

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When I go to put the cruise on it does not light up if i turn the steering wheel half way it will work sometimes but the light goes out again

Sounds like you might have an issue with either your multifunction switch or possibly your clock spring, if your cruse controls are steering wheel mounted.

Feb 12, 2016 | 2006 Chrysler Pacifica Touring

1 Answer

What does the (BTSI) solenoid control in 2005 chysler pacifica

Brake Transmission Shift Interlock (BTSI) solenoid.
The shift interlock solenoid is located at the bottom of the steering column.

I am assuming your needing it replaced or getting a code readout telling you it is bad? To determine if this is your problem:
First thing, did you check the brake lights to see that they are working?
Did you check ALL of the fuses to make sure NONE of them are blown?
Lastly. Put the park brake on, turn the key so that it just unlocks the steering wheel, but does NOT turn on any lights. Will the shifter move out of park? If yes, then it isn't the solenoid. If no, then you are on the right track.

Sep 24, 2012 | 2005 Chrysler Pacifica

1 Answer

Why does fuse # 25 keep blowing out on my Chrysler pacifica 2004

Fuses pop because it is breaking the direct line of voltage that is being selected...anotherwords...instead of when you turn on your radio and the incorrect amount of voltage that is being sent to the radio frys it, the fuse breaks/pops to stop the flow of voltage to the radio.

The problem seems to either be a bad relay or wires are touching somewhere in that system.

Nov 20, 2011 | 2004 Chrysler Pacifica

1 Answer

No power to the steering controls, air bag light on. This occured after the rack and pinion were replaced. 20 minutes after leaving the shop, there was a loud snap and light came on and no more power to...

check the main fuses in both fuse boxes, the one in the vehicle and the one under the hood. I'm not positive on your vehicle which one contains the blown fuse, check them with a meter if you have one, Now,, when you say steering controls are you saying that whatever is attached to your steering wheel has stopped working ( radio controls, stuff like that ?) unless they disassembled anything on your steering unit , they are probably right and its just one of those things. but if they did take anything to do with the steering wheel apart, I'd ask them again to double check the work, now if by steering controls your saying the car isn' steering correctly, then it has everything to do with the work they did, and I'd take it right back to them.

Oct 04, 2011 | 2004 Chrysler Pacifica

1 Answer

The in steering wheel cruise control doe's not light up. What fuse is it for replacement?

its a fiber optic line. No fuse. The fiber optic plainly fell out of its slot to beam the light through the white lettering for your cruise control buttons

Feb 06, 2010 | 2006 Chrysler Pacifica

1 Answer

Popping sound from Chrysler Pacifica

it is called a clockspring.
the other thing to check is that the rear part of the steering wheel is clearing the column shroud properly.
call a few places in your area and how much it is to change the clockspring.

May 28, 2009 | 2005 Chevrolet Malibu

1 Answer

2006 chrysler sebring- Radio controls on back of steering wheel

sounds like something wasn't hooked back up properly

Jan 02, 2009 | 2006 Chrysler Sebring

3 Answers

Multable problems

It happened to our 99 too, turned out to be inside the steering wheel. a coil that Chrysler recalled. It was a free repair at a dealership

Aug 17, 2008 | 1999 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

Related Topics:

661 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides