Question about 1995 Pontiac Grand Am

1 Answer

Car turning over without keys in igntion

Help me fix this piece of _____!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You need to put in a new ignition.the tumblers in yours are worn out so you can start the car without a key.its about 12.00 at the auto parts store and theres a pin hole where you can insert the end of a paperclip to help remove the old ignition switch

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace the ignition switch on a 1999 ford taurus without the key


very simple, insert key in the ignition. Then insert a small phillips head screw driver in the middle hole underneath the steering column.You should feel the screwdriver head hit a hole.Maintain pressure on the screwdriver. Turn the key to the on postion(without starting the vehicle).You should be able to pull the igntion switch out with the key.

Sep 10, 2013 | 2000 Ford Taurus

1 Answer

Mustang cobra 1996 the key turns freely and wont turn off the car? how do i fix this


Need igntion cylinder. You should be able to buy one at any auto parts store. Usually comes with keys and directions very easy to replace 10 min job.

Sep 06, 2010 | 1996 Ford Mustang

1 Answer

How do i disable theftlock system battery was removed without turning off first.


WELL TRY THIS YOU TAKE THE KEY AND PUT IT IN THE IGNTION AND TURN IT TO ON POSION AND LET IT SIT FOR ABOUT 15MIN THEN TRY TO START THE CAR THIS SHOULD WORK FOR YOU IN NOT LET ME KNOW AND I WILL HELP AS LONG IT WAS JUST THE BATTERY THAT MAD THE SYSTEM LOCK YOU OUT

Mar 16, 2010 | 1997 Pontiac Grand Prix

1 Answer

Got a secarety light on


most likely the tiny wire from the igntion cylinder to the security module is broken. First try using another key, if the other key didn't fix it you'll most likely need to replace the igntion cylinder.

Dec 31, 2009 | 1997 Buick LeSabre

1 Answer

1998 cheverlet pickup,security light came on and dont know how to reset it???


can't be reset. the security system consist of the igntion key, igntion key cylinder, wire harness and module.
the most likey cause of this is the tiny wire harness from the igntion cylinder to the module is broken where it goes into the cylinder.
you can try using another igntion key, if still persist you'll need to get this fixed, sooner or later this will not allow you to start the engine.

Nov 02, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Igntion switch (the starter immediately start )


I would change the starter out and that will fix your problem

Sep 10, 2009 | 1996 Chevrolet Cavalier

2 Answers

Factory alarm wont stop


You can try to use another key if you have one, get one made. Also try to lock and unlock the doors, if this does not help you will need to bring vehicle to shop with high end scan tool so they can monitor what part of the security system is activating. Thanks

Jun 08, 2009 | 1995 Nissan Maxima

2 Answers

Ignition bmw 318ti 1998 compact


replace ignition switch with a new key.

Apr 25, 2009 | 1996 BMW 318

1 Answer

Soon as I connected the battery the engine started turning over without the keyswitch on


THESE GM VEHICLES ONLY NEED TO SEE A RISE IN IGNTION VOLTAGE IF THE KEY IS ON ANF THE CAR WILL CRANK. ALWAYS CONNECT THE BATTERY WITH THE KEY OUT OF IGNITION.

Mar 22, 2009 | 2001 Chevrolet Blazer

1 Answer

Ignition locked


try spraying oil inside cylinder run key in and out rapidly and then try and turn cylinder. if that doesn't work look inside ignition cylinder with flashlight at the opening where key goes in the should be a little copper colored piece of metal which is you buzzer button sometimes it will break off and go down in ignition wich will not allow key to turn if this doesn't help let me know and i will explain how to remove the igntion and replace cylinder

Nov 05, 2008 | 1999 Mercury Cougar

Not finding what you are looking for?
1995 Pontiac Grand Am Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...