An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 500 points.
Re: how to change heater core 2001 dodge 2500
You can probably avoid removing the dash to replace this get under and start dissasembling to find out for sure you should avoid taking that dash out if at all possible they are a real pain - good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
heater core is most likely the prob. its a long process to replace but can be done. replaced mine in my 99 ram 2500. remove steering column and entire dash to reveal heater core, passenger side floor area.
On the outside under the hood and along the fire wall..... There are about 5 nuts that must be taken off to allow the heater core and AC condenser box to be removed. You must remove the air filter box and associated hoses.... Then under that is a bracket which holds the ac accumulator (which also must be removed) Then these is the main computer on the fire wall on the on passenger side that needs to be removed to access all the nuts needed to be removed to let the heater/ac box loose from the fire wall. I am not a mechanic... I am an IT Computer guy that had just went through this process and it is HELL. Took me 2 days.
are heater inlet outlet mix valves standard for all dodge heater cores. I have 2001 dodge cummings blows warm air not hot when gauge is 195 degrees would there be a mix valve under the dash because it is not inline outside the wall
Most large auto parts stores have the book for your truck with a section on the heater core. Call the store first then if they have the book go and read the heater core replacement section to be surre its in the book.
I hope this helps you.
You have to pull the dash and all the lower fascia, then remove the box that houses the Heater Core Take the clamps off the heater hoses from the engine compartment side of the firewall and disconnect the heater hoses. Disconnect the bracket that holds the heatercore in place from the inside of the passenger compartment (if present.) Carefully remove the heatercore and discard it. Install a new heatercore reversing the above steps.