Question about 2005 Jeep Liberty

1 Answer

Door panel removal

I need to replace the mirror assembly on the passenger side of my 2003 Jeep Liberty. In order to do this I need to remove the door panel. How does the door panel come off? I assume it's clipped on, but I don't want to break it taking it off.

Posted by on

  • 2 more comments 
  • TNClubz Mar 20, 2009

    I got all the clips removed except for the upper part of the door...how would I go about removing the upper part? there are no clips up there that i can see when im pulling it back.

  • kamen256 Mar 26, 2009

    i did this however the door locking button and the door opening handle are still stuck. How do I release them?

  • Anonymous Mar 23, 2014

    replace

  • Anonymous Mar 30, 2014

    Window is stuck and will not go up

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

There are a few screws you need to remove before pulling off the panel. one is in the inner door handle, the other is behind the inner door release handle and there may be one in the very top left of door panel

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

1 Answer

Im trying to replace the passenger mirror, need to


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Once the panel is off, you will see two or three bolts securing the mirror assembly onto the door

Sep 21, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

Pontiac Montana


You'll have to replace the entire assembly if you're missing the mounting piece that the mirrors sit on inside the housing... You'll need to remove the door panel in order to remove the panel that's right beside the mirror on the inside of the door and remove the 3 bolts holding the mirror down assembly down....

Aug 11, 2009 | 2003 Pontiac Montana

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

2 Answers

Replacing passenger side mirror


no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

May 28, 2009 | 2003 Nissan Xterra

1 Answer

Replace 2007 Toyota Rav4 super sport passenger side door mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Putting new mirror on passenger side door?


Behind the passenger-side front-door at the bottom of the window
you will find a molded triangular panel with a tweeter [audio speaker].
To access the nuts that affix the side-view mirror to the door you will
remove the panel. Gently pry on the top of the panel to remove it but be careful as speaker wires will be attached. Quick way to replace the mirror assembly is to support the panel and don't put stress on the wires. Open the door and find the nuts that hold the mirror onto the door. If you have electric powered mirrors you will need to separate the connector that sends current to the mirror for the remote function. Remove the nuts and be very careful not to drop the nuts into the door cavity. Good luck!

Jan 10, 2009 | 2003 Oldsmobile Alero

1 Answer

Replace Driver's side mirror - Jeep Liberty 2002


The door panel has plastic clips that hold it in place also. Put a thin blade screwdriver between the panel and door. Pry the panel away from the door. The panel will make a loud snapping noise, that is the clip coming out of the retaining hole. Sometimes the clips break.

Dec 09, 2008 | 2002 Jeep Liberty

1 Answer

Replacing passenger side mirror


If you are replacing the entire mirror assembly you have to remove the door panel.

First remove the switch plate by prying upward at the rear of the switch plate and unhook the connectors. Then remove the two armrest screws. The door panel then has to be pryed away from the door to release the clips. They don't give up easily so yo may have to force it a bit. Once the clips are loose pull up on the panel to remove it from the window reveal molding. The mirror is held on with three 10mm nuts. remove those and unhook the wiring from in the door. Install is reverse of removal.

Good Luck

Aug 26, 2008 | 2003 Pontiac Montana

Not finding what you are looking for?
2005 Jeep Liberty Logo

812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...