Question about 2007 Dodge Ram 1500 Quad Cab Sport
On the side of the carb there a fuel sensor there...Has tiny screws and wires running to it. If it goes bad your car will idle..Your ECM sends a signal to open it for fuel..If it goes bad it want turn...Might try tapping likely on it...Go to your auto store and ask them about it first...Then you will understand better about how it works and if this seems to be your issue
Posted on Dec 08, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1996 Dodge Ram 1500 won't idle
First thing I'd do is remove idle speed motor, or idle air control, same thing, different names. remove wire connector, remove motor, and get some throttle body spray cleaner, and spray shaft & tip of motor well & clean it all up, as well as spray in to port (hole) that it came out of. Re-install & try that. They are pretty common problem. If it cure it for a while, then starts to act up again, replace it, and clean port well before installing new one. here's a link to give you an idea of what your looking for, click on pictures to expand them.
Posted on Jan 18, 2009
if you do it do it at the dealer that you got it from so it wont void the warranty. that way you keep it in place and they can also tell you the specifications as to what you need to do ,if anything to the front of the truck
Posted on Jan 26, 2009
SOURCE: check engine light on code
This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.
Posted on May 10, 2009
I have the same problem. It started with engine code 0440 (evap system malfunction). I changed the gas cap and now getting the "loose cap" light plus the 0456 (evap leak very small) and 0457 (gas cap loose/off)
Anyone know where the sensor is located?
Posted on Jul 05, 2009
Tips for a great answer:
Jan 07, 2016 | Dodge Cars & Trucks
Dec 19, 2015 | Dodge Cars & Trucks
May 12, 2015 | 2004 Dodge Ram 1500
Feb 17, 2015 | 2004 Dodge Ram 1500
Mar 23, 2014 | 2004 Dodge Ram 1500
Mar 15, 2011 | 2007 Dodge Ram Truck
Apr 16, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport
Feb 14, 2010 | 2005 Dodge Ram 1500
Nov 08, 2009 | 2004 Dodge Ram 1500
Aug 12, 2014 | 2007 Dodge Ram 1500 Quad Cab Sport
137 people viewed this question
Usually answered in minutes!