Question about 1997 Mitsubishi Montero

1 Answer

Mitsibushi montero 1997

I replaced the alternator and now when i stop at a junction the rpm drops and it stalls whats goin on..?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

When battery is disconnected sometime the system needs to reset itself like the idle speed control goes out of wack. What I recommend is to make sure you didn't know any vacuum hose or any air intake hoses were not broken in the process of replacing alternator. Double check everything and make sure its all in-tact. If all is good then start vehicle and step on accelerator holding RPM at 2500 for 3 minutes, then let go this should reset the idle speed motor. Contact if you need more help. Good Luck

Posted on Dec 31, 2008

  • rr241 Aug 26, 2012

    I have the same problem my battery died and after i jumped it, when i let go of the gas it drops blow 1 and dies, especialy if in neutral. In drive it takes it a lot longer. I tried advice revved the car at 2500-3000 RPM for 3 min but did not work.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the lines and Hoses on a 1997 Mitsubishi Montero Sport LS. My car won't go pass 1500 rpm's in drive can someone help!


The service manual may help. You can get access to it free at your local library, but you have to go to the local branch to access it.

Mar 09, 2015 | 1997 Mitsubishi Montero Sport

1 Answer

Come to stop truck wont idle it shutts off


That's a very high rpm for an idle! It should be between 700 to 9oo rpm. This truck needs a tune up, at least!

Jan 21, 2013 | 1997 Dodge Ram 1500 Club Cab

1 Answer

My car stalls when slowing to stop or crawling in traffic.


i had the same problem on my 95 pajero 3500 andafter all my troubles my car produced an occasional airfilter blow back from running on gas before it finally would'nt run my problem turned out to be my crankshaft sensor was failing then died.

Mar 14, 2010 | 1997 Mitsubishi Montero

1 Answer

I have a 98 Montero Sport with low rpm engine stalls...


spark plug cable is lose or one spark plug is faulty.

Jan 24, 2010 | 1998 Mitsubishi Montero Sport

1 Answer

My 1996 GMC jimmy wants to stall when I come to a stop. The RPM gage goes up & down then drops below 1000 RPMS and stalls.


I would go down to your local auto parts store and do an alternator and battery test. It sounds like at low rpms you are loosing volts. When you apply the brakes you would be supprised how much power from the engine it takes. You could also be loosing oil pressure. Check your oil level. When your engine drops low rpm, the oil pressure drops and shuts down the engine.

Jan 09, 2010 | 1996 GMC Jimmy

1 Answer

I parked the mitsibushi montero sport that I was


make sure the brake lever is all the way reased if it is it could be the switch moved out of adjustment or a wire has came loose from the switch or the switch has gone bad, and still yet there may be a problem with the brake system unrelated to the hand brake.
hope this helped

Oct 17, 2009 | 1999 Mitsubishi Montero Sport

1 Answer

I have a 1997 jeep Cherokee Sport with a 4.0L inline 6 and it will not start unless i put the peddle to the flour. win it dose start the RPM will stay up and slowly drop to around 1000 RPM. it usually is...


What your are describing for symptons actually sounds like a sensor and a valve the starting problem is aa sensor Throttle position sensor and the stalling problem is your idle air control valve hope this info helps just make sure after you replace these 2 items that you disconnect the battery for about 10 minutes so the computer resets itself.

Sep 25, 2009 | 1997 Jeep Cherokee

2 Answers

Mitsubishi Montero Sport 2002 Idle problem


the engine compensates for the load try turning up the idle screw also check the ignition system you might just need new wires and or cap rotor or your coil is bad also plugs

May 31, 2009 | 2002 Mitsubishi Montero Sport

1 Answer

BMW 316i KEEPS STALLING WHEN SLOWING DOWN AT JUNCTIONS


at the engine, there is a small sensor that helps increase or decrease the rpm of the engine. Perhaps yours is soo low, that when you slow down, it's almost about to stop.

The other problem could be the airfilter sensor. If it's not properly fixed or if the sensor itself is a bit damaged, than the engine is not getting enough air and so, let's the engine almost go off.

Please give further details if this has not helped.

thank you

May 06, 2009 | 1997 BMW 318

Not finding what you are looking for?
Cars & Trucks Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...