Question about 2000 Ford F350 Super Duty Super Cab

1 Answer

Truck won't start using the key.

My truck won't start when I turn the key. The steering unlocks and all of the accessories work, but no ignition. It is equipped with a remote start, and that works fine, and then I am turning key to unlock steering. Any ideas of where to start

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If this is a ford pick up. ther is a starter solonoid on the rt side of the front fender that controls the starter, open the hood and look for it, it will have a round body with wires going to bothsides and out the top of it, make a jumper short across both big terminals with the big wires and see if the truck will start, if it does the solonoid is bad, replace it, that should work.

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ignition key won t turn


Is the security light on??? if it is I think I found a fix.. Read up on this site I think this is the issue

Jul 24, 2014 | Chevrolet 1500 Cars & Trucks

1 Answer

My f150 truck steering wheel is locked and I cant turn the key at the same time. How do I unlock it.


Sprayed the WD-40 in the ignition twice, place towel over key and tapped the the pawn of my hand and the key turn and the steering wheel unlock. It was awesome, it did a great job.

Aug 06, 2012 | Cars & Trucks

1 Answer

I have a 1996 dodge ram 1500,the ignition won't start the truck or turn on the accessories.i have replaced the ignition switch but that didn't work.


is the battery dead or ist good check the voltage on it it should be arround 12.8 might be your alternator too

Jul 25, 2012 | Cars & Trucks

1 Answer

How do i get the key to unlock the steering wheel so i can start the truck?


Try a little spray lubricant and work the key back and forth. If this does not at least help the issue, than the ignition switch will have to be replaced and new keys programmed.

Feb 01, 2012 | 2002 Ford Explorer

1 Answer

1999 mercedes c280 smartkey won't turn ignition


go to dealer to reset system, or download instructions from internet. It may be possible for a tow-truck operator to do this, but ask and check first, so you don't pay for nothing.

Jan 26, 2012 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Steering wheel is locked on my 95 ford f150 xl..it starts and goes into gear but the steering wheel won't move..it is locked


you can break the lock by pulling down on the steering whell very hard. or if your ignitons swith is bad you have to get a new one

Nov 13, 2011 | 1995 Ford F150 Styleside Regular Cab

1 Answer

My 1998 chevy truck ignition stuck I took the steering wheel off


You need a lock plate removal tool,napa sells them ,they are cheap,and the pin in the key cylinder? Use a punch to destroy the pin.

Jul 21, 2010 | 1998 Chevrolet K1500

4 Answers

Key wont turn in ignition


try wiggleling the key too the tumblers may be getting worn in the ignition is this works then replace the ignition

May 10, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

98 ranger locked in park,ignition key won''t turn to start


there is a harness that feeds the ignition remove your steering wheel cover and you will see about a dozen wires going into a clip that is attached to the back of the steering wheel , those wires give way and are not making contact reach in to the back and pull the harness forward and then try and push each wire back into the clip try this and see if it works it solved my problem basicly it is just a loose wire in the harness,,

Jan 13, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
2000 Ford F350 Super Duty Super Cab Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...