Question about 1993 Oldsmobile Cutlass Supreme

1 Answer

Turn signals do not work

Turn signals don't work, all other lights work, could it be a fuse, if so, where is the fuse box in the car?

Posted by on

  • Anonymous Jan 15, 2009

    turn signal does not work and i am unable to locate where the flasher is located?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

IT WAS THE FUSE....WE FOUND THE FUSE BOX.

THANKS

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 dodge spirit turn signals don't flash. Do I need a new fuse? Where is box?


The bulb that shows other drivers the turn might need to be replaced.

Nov 27, 2012 | 1991 Dodge Spirit

2 Answers

Ok i don't know about much about cars but i know


sounds like the signal switch relay fuse. turn your signal on and check your fuse boxes... inside the car and under the hood. it will look like a little square box inside your fuse box next to your other fuses. with your signal on, you should be able to locate the relay because it will be making a clicking noise. pull it straight out and go get another one. hope this helps.

Nov 03, 2012 | Cars & Trucks

1 Answer

2009 Impreza 5-door left tail light and turn signal don't work .


first of all check and confirm whether in the fuse box separates the left from right side and see for blown fuse. or check for any disconnection on the rear light

Aug 10, 2012 | 2009 Subaru Impreza 2.5i

1 Answer

Brake Lights and Turn Signals don't work


Check fuses should be under dash or glove box & bulbs

Jun 12, 2012 | Cars & Trucks

1 Answer

Turn signal lights don't work even though hazards do


Sound like a flasher device go to bad; check in fuse box and replace it to solve this problem.

Jun 11, 2012 | 2006 Chrysler Town & Country

1 Answer

The signal lights or emergency lights do light up when turning on!!!


Without knowing the year/make/model, and without an owners manual, I can't really tell you which fuse. Check in your owners manual to see which fuse is for your 4-ways/hazard lights and turn signals. If you don't have the owners manual, check inside the cover of the fuse boxes as many cars will list what fuse is for what feature

Dec 28, 2011 | Honda Accord Cars & Trucks

1 Answer

I have no brake lights in my '97 dodge caravan le but i have taillights


Have yoiu changed/checled the lightbulbs? (In other words,do your turn signal lights work? If the front turn signal lights work, but the rear don't, then turn on your four (4) way flashers. If the rear lights still don't work, then all the bulbs are bad. It is rare for all the bulbs to be burnt out at the same time, but it does happen.

If the turn signal/four way flasher lights work, then you probably have a bad brake light switch. However, first check your owner's manual to make certain there is not a separate fuse for these lights. If there is, then swap the fuse for the brake lights for another fuse (or relay) of the same size/amperage. (Facing the hood, the power relay box is located on the right side (usually) under the hood.)

The fuse box is located under the dash, on the driver's side of the car. Usually there is a plastic cover that has to be removed to access the underside of the dash, and then there is a plastic cover that has to be removed to access the fuse box. If you don't have an owner's manual, nprmally the fuses and power relays are normally marked on the plastic covers your remove ot access the fuses and power relays.

If the fuses/relays are good, then you have a bad brake light switch. This is located on a bracket just above the brake pedal. When you push the pedal down, the switch makes contact. Disconnect the plug to the switch, and jump across the plug contacts (not the switch) with a small piece of wire, or if a piece of insulated wire is unavailable, you can use a paperclip, you won't get schocked, just make certain that the paperclip does not come in contact with a ground while you have it plugged in to the plug for the brake light switch.

If the lights stil dont work, check for power to the plug for the brake light switch. If you have power to the plug, the turn signals and four-way flashers work, then my guess would be that you have a broken power wire (probably iside the steering column, or a bad turn signal switch. If the brake lights work whe nyou jump out the brake light switch, then the brake light switch is defective.

Oct 16, 2011 | 1997 Dodge Caravan

1 Answer

No turn signals,brake lights. have tails lights. all fuses in fuse box under check out ok


The turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect that switch.

Sep 21, 2011 | 1994 GMC Suburban

Not finding what you are looking for?
1993 Oldsmobile Cutlass Supreme Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...