Question about 1995 Chevrolet Monte Carlo

1 Answer

Where is the coolant temp sensor located on a 1995 chev monte car

Cannot find the location in the computer where the sensor is located in a 95 z34

Posted by on

  • 1 more comment 
  • michelleboru Dec 30, 2008

    3.4 DOHC

  • Anonymous Mar 20, 2014

    engine coolant temp sensor circuit high voltage

  • Anonymous Mar 30, 2014

    was sold the part but i cant find it on a vortec 4200 i6



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 104 Answers

Im not sure what motor you have, but the best way, usually, to find the coolant sensor is to trace out the upper radiator hose to the thermostat housing. Once you find this, look around for a two or possibly three wire electrical connector in close proximity to the thermostat housing.

If you can clarify which motor your have I may be able to find something more specific.

Posted on Dec 30, 2008

  • Scotty
    Scotty Dec 30, 2008

    I could not find a good picture of where it is at, but I did confirm that if you follow the upper radiator hose to the engine, that will be the thermostat housing. If you look down and to the right some on the side of that thermostat housing you will see a brass looking thing sticking out of the housing with a connector on it. That is the coolant temperature sensor.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine diagram for the iat sensor location for 1995 3.4 monte carlo z34

For its exact location on your vehicle,click the link below:----
Chevy Monte Carlo IAT Location

These will help.

Nov 22, 2012 | Cars & Trucks

1 Answer

Cant find the relay switch for the gas. need to reset the relay button. find out where the location is. its a 95 monte carlo z34

The monte carlo does not have a inertia switch you have a relay that would need to be changed out which is located under the hood of the vehicle.

Jun 08, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I need to replace the coolant sensor on my 1998 Z34 Monte Carlo. Where is it loacted and how do I do it?

Should be located on the top of motor. May bre next to thermostat. Drain some coolant from bottom of radiator. Use liquid teflon for thread sealant.

May 14, 2011 | 1998 Chevrolet Monte Carlo

2 Answers

Where is shift solenoid located on 95 monte carlo z34

The transaxle shift solenoids are located in the transaxle.

Hope this helps, it it does please leave feedback and vote Thank You and Good Luck

Jan 02, 2011 | 1995 Chevrolet Monte Carlo

2 Answers

1995 Monte carlo both fans don't work and it runs hot help put new thermostat in and fan motor now what

Try unplugging the coolant temperature sensor and see if the fans come on.If they do then the coolant temp sensor needs to replaced. The sensor is located in the intake manifold by the upper radiator hose.Here is a link to provide a general location

May 28, 2010 | 1995 Chevrolet Monte Carlo

1 Answer

Setting valve timing on dohc 3.4 chev z34 95 model year

There should be a notch or something on both the cam gear and crank gear. Make sure that you have them lined up (preferably up), so the engine is at TDC.

If you were looking for how to set the ignition timing, that is all computer controlled and there really is no distributor to twist. All coil pack ignition modules.

Jan 02, 2010 | 1995 Chevrolet Monte Carlo

2 Answers

Looking for speedometer sencor location on a 95

It should be mounted in the transmission housing itself, near the output shaft, or possibly half way up a cable coming from the transmission.

Sep 09, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

Location of the temp sensor on a 95 roadmaster?

Location of the temp sensor on a 95 century

Jul 28, 2008 | 1995 Buick Roadmaster

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

814 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides