Question about 2002 Mitsubishi Lancer

2 Answers

My headlights only work on highbeam.

I have a 2002 mitsh lancer and when i put it on headlight all the lights work except the low beams then i put on highbeam and the highbeams go on . Is there a relay in the engine compartment that could have blown or a fuse. I also checked the bulbs and got new ones same problem.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 166 Answers

You may need 2 new head light globes it is not uncommon for both low beam filaments to blow around the same time may be check the globes before getting to carried away with relays ect.

Posted on Jan 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 37 Answers

Yes there is a relay switch that allows the low to high beam switch to occur. It shoud be mounted under the hood along the firewall. Check your manual too!

Thanks,

Mark

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why both low beam headlights stopped working at same time?


my quess is the headlight dimmer switch is bad,cant be headlight switch cause lights come on.strange things happen on car electrics still could be bulbs burned out,it does happen.buy one put it in see if light comes on,if not dimmerswitch is bad

Jan 03, 2015 | Cars & Trucks

1 Answer

S10 1998 high beam problem


If I remember correctly, there is only one bulb on each side for the headlights. Is it possible that you actually have the highbeams set but the highbeam filament in the light is burned out so you're not actually using the highbeam?

Apr 18, 2013 | Cars & Trucks

2 Answers

My durango headlight will not work on the right side


Well the turn signals are a different circuit.
Usually the common problem with one headlight is the ground circuit.
Both the high and low beam use the same ground. I would check for power for each circuit and a good ground at the light socket.

Dec 04, 2012 | 2002 Dodge Durango

1 Answer

Low beam headlights sometime will not go on, or go off after using highbeams.


low beam not working could be relay or bad contact at stork control. Fog lights should only work with park lights on. not supposed to be on with headlights like in the movies. This is illeagle in australia to have head lighs and fog lights on together as well as being dangerous to other motorists

Nov 16, 2012 | 2004 Ford Focus

1 Answer

Low beam does not light up


If your highbeams work theres a strong possibility that BOTH your headlight bulbs the low beam filament is burned out, if the highbeams dont work either check all related wiring and fuses for the headlights also the headlight switch on your steering column....

Dec 07, 2010 | 2003 Ford Focus

1 Answer

My left headlight highbeam light works and the lowbeam don't why


the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.

Sep 07, 2009 | 1998 Ford Windstar

1 Answer

2002 dodge caravan headlights not working simustaneously but works high beam


replace the headlight bulbs. When the bulbs are bad highbeams keep working but the low beams dont.

Jun 26, 2009 | 2002 Dodge Caravan

1 Answer

Dynasty headlights


it is ur switch that changes it from low beam to high beam
[ turn singnal switch]

Feb 15, 2009 | 1990 Dodge Dynasty

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

1 Answer

I need the headlight wiring scamatics for a 2005 impala


2002 impala highbeam light ,with new bulb inplace ,it will not come on.low beam, left turn light works I think it is in the wiing connector the headlight asemble .would like to know how the wring is connecting to the headlight asemble. please help. thanks jame

Aug 02, 2008 | 2002 Chevrolet Impala

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...