Question about 1995 Ford Explorer

1 Answer

Starter removal 94 explorer

How to remove the starter for 94 explorer

Posted by on

  • granttyussr Mar 30, 2009

    cant find where my starter is located for my 1995 ford explorer 4x4 4door 4.0 liter suv

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

U have to undo the motor mounts put a board under ur oil pan lift ur motor i think its three bolts to the starter

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a starter on a 94' cutlass


3.1L Engines - 1988-94 VEHICLES
(see Figures 5, 6, 7 and 8)
  1. Remove the air cleaner and duct assembly.
  2. Disconnect the negative battery cable.
  3. Raise and safely support the vehicle.
  4. If equipped with an engine oil cooler, drain the engine oil, remove the oil filter and position the hose next to the starter motor to the side.
  5. Remove the nut from the brace at the air conditioning compressor, nut from the brace at the engine and the brace.
  6. Unfasten the retaining bolts, then remove the flywheel inspection cover.
zjlimited_919.jpg

Fig. 5: Unfasten the retaining bolts ...

zjlimited_920.jpg

Fig. 6: ... then remove the flywheel cover

  1. Remove the starter bolts and shims, if equipped. Do not let the starter hang from the starter wires.

zjlimited_921.jpg



Fig. 7: An extension may be needed to access the starter mounting bolts

zjlimited_922.jpg

Fig. 8: Remove the starter motor and any shims that may have been used

  1. Detach the starter wires from the solenoid, then remove the starter from the vehicle.
To install:
  1. While supporting the starter, connect the starter wires at the solenoid.
  2. Install the starter motor-to-engine mount with the shims, if equipped, and the mounting bolts. Tighten the bolts to 32 ft. lbs. (43 Nm).
  3. If equipped with an engine oil cooler, reposition the hose next to the starter motor, install the oil filter and refill the engine with the proper amount of engine oil.
  4. Install the flywheel inspection cover and tighten the bolts.
  5. Install the starter support brace to the air conditioning compressor and tighten the nut to 23 ft. lbs. (31 Nm).
  6. Carefully lower the vehicle, then connect the negative battery cable.
  7. Install the air cleaner and duct assembly.

Hope helps.

Mar 23, 2011 | 1994 Oldsmobile Cutlass Supreme

1 Answer

How to put the Starter in a Eagle Talon 1991.


from autozone.com


REMOVAL & INSTALLATION
See Figures 5, 6, 7, 8, 9 and 10

  1. Disconnect the negative, then the positive battery cables from the battery.
  2. For 1990-94 vehicles, remove the battery and battery tray from the engine compartment.
  3. For 1990-94 vehicles, detach the speedometer cable connector from the transaxle.
  4. For 1995-98 2.0L turbo engines, remove the air hose.
  5. For 1995-98 2.4L engines, remove the air cleaner and air intake hose.
  6. If equipped with 1.8L engine, remove the bracket on the lower side if the intake manifold.
  7. Detach the starter motor electrical connections.
6f8c23b.gif

Fig. Fig. 5: Exploded view of the starter motor and related components-1990-94 vehicles, others similar


458b681.gif

Fig. Fig. 6: Unfasten the BAT terminal connector from the starter motor


05a1691.gif

Fig. Fig. 7: Unplug the starter motor electrical connector

  1. Unfasten the starter motor mounting bolts, then remove the starter from the vehicle.
d0adab9.gif

Fig. Fig. 8: Unfasten the starter mounting bolts
d00c214.gif

Fig. Fig. 9: Remove all of the starter mounting bolts ...
c92a470.gif

Fig. Fig. 10: ... then remove the starter motor from the vehicle
To install:

  1. Clean both surfaces of starter motor flange and rear plate. Install the starter motor onto the engine and secure with the retainer bolts. Tighten the retainers to the specifications shown in the accompanying figure.
  2. Attach the electrical harness connector(s) to the starter.
  3. If removed, install the intake manifold stay and tighten the retainers to 18 ft. lbs. (25 Nm).
  4. For 1995-98 2.4L engines, install the air cleaner and air intake hose.
  5. For 1995-98 2.0L turbo engines, install the air hose.
  6. For 1990-94 vehicles, attach the speedometer cable to the transaxle. Install the battery tray and battery.
  7. Connect the positive, then the negative battery cables.
Operate the starter to assure proper operation.

Oct 29, 2010 | 1991 Eagle Talon

1 Answer

I have the new starter and have removed the battery and the battery holder tray but can't figure out how to reach and remove starter.


here are some instructions and pics from autozone.com. there may be a bracket you have to remove.
  1. Disconnect the negative, then the positive battery cables from the battery.
  2. For 1990-94 vehicles, remove the battery and battery tray from the engine compartment.
  3. For 1990-94 vehicles, detach the speedometer cable connector from the transaxle.
  4. For 1995-98 2.0L turbo engines, remove the air hose.
  5. For 1995-98 2.4L engines, remove the air cleaner and air intake hose.
  6. If equipped with 1.8L engine, remove the bracket on the lower side if the intake manifold.
  7. Detach the starter motor electrical connections.


97b3d24.gif6e589a1.gif

Sep 28, 2010 | 1991 Plymouth Laser

1 Answer

1998 ford explorer/ need location to remove and


If your going to be removing all of this I recommend you get the Haynes repair manual on the vehicle so you have the illustrations and directions for dis-assembly and assembly of the starter. The starter should be located on the bottom right of the engine where the Transmission attaches.

Jul 11, 2010 | 1998 Ford Explorer

1 Answer

Location of starter relay on 98 ford explorer


starter relay is under hood on the drivers side fender area.034ad7c.gif
  1. Disconnect the battery ground cable (14301).
  1. Disconnect the starter motor solenoid relay switch wiring.
    1. Remove the protective cover.
    1. Disconnect the push-on electrical connector.
    1. Remove the nuts.
    1. Remove the cable.
    2. d57efc7.gif
    Remove the starter motor solenoid relay switch (11450).
    1. Remove the engine sensor/generator wires.
    1. Remove the bolts and ground wire.
    1. Remove the starter motor solenoid relay switch
    2. 1056336.gif

Oct 22, 2009 | 1998 Ford Explorer

1 Answer

94 ford explorer, starter won't turn


If you have the proper voltage at the starter, (battery voltage) and the starter won't turn, it is the starter or the engine. Try turning the engine over with a wrench on the harmonic balancer.

Jun 22, 2009 | 1994 Ford Explorer Limited

1 Answer

CHANGING STARTER ON 94 SONOMA


Hi Terrie- You can go to '94 GMC Somoma Repair' and there are numerous sites. But I think you have to remove the 4 prong wire (may have to wait for entire unit before removing red lead?) and crossmember (only 4 bolts?) and/or then loosen 1 bolt then remove other-thenstand it up and turn around before you slide out and down. Not that big-o-deal but it helps to know before you go in(you can call |GMC and ask Service Dept. Good luck and God bless
Steve

Jan 27, 2009 | 1991 GMC Sonoma

2 Answers

Transmission removal


The starter must also be removed and the 4 torque convertor bolts need to be removed, after that only the shift linkage remains and out it comes.

Jan 15, 2009 | 1994 Ford Explorer Limited

1 Answer

Replacing a starter on a 1997 Dodge Intrepid


No, you can access the starter from the bottom of the engine without having to remove anything else. I replaced the starter on my 94 3.3 myself without having to remove anything else. Good Luck!!!!!

-Matthew

Nov 11, 2008 | 1997 Dodge Intrepid

1 Answer

94 explorer, no spark


The starter has power only if the battery is good.The ignition coil gives the engine spark.

Aug 25, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1995 Ford Explorer Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...