Question about 2004 Land Rover Discovery

1 Answer

The auxilary gear is locked in high position.

2004 Landrover discovery HSE. when i start it in the mornings the M and S warning flashes



Posted by on

  • Anonymous May 07, 2009

    The shift gear is stuck in the parking mode

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 53 Answers

Make sure you are on level ground. All 4 wheels must be =. Play around with the diff-lock switch.

GL

http://carservicemanuals.blogspot.com/2008/06/download-land-rover-discovery-workshop.html

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the starting problem and the engine warning lamp?


from listening to other Land Rover owners this type of thing is very common , the quickest thing to try is to press the lock button on the fob four times , this should resync the fob and alarm/immob and ignition,if no better then i'm afraid a visit to a mechanic with some landrover experience would be my advise

Feb 23, 2015 | 2004 Land Rover Discovery

1 Answer

How do I reset brake warning lights on a landrover 2009 discovery 4 after new brakes were fitted


switch on ignition, pull parking brake button upwards for approx 10 seconds...if it does not reset, you will have to have mount positions recalibrated with LR computer

Feb 21, 2015 | 2009 Land Rover Rover Discovery

1 Answer

How do i engage into 4 Wheel Drive Mode on my V8 4.6 HSE


a 1999 landrover Range Rover is in constant 4 wheel drive. the only change you can make is high or low range and this is handled through the gear shift selection.

Feb 13, 2014 | 1999 Land Rover Range Rover

1 Answer

Cant locate oil dipstick in my landrover discovery HSE 4


It does not have 1 You can check the oil level when you turn the ignition on , Press the state button no foot on brake and scroll through the menu till you find it.

Apr 14, 2012 | Land Rover Discovery Cars & Trucks

2 Answers

Discovery td5 auto. M & S warning lights come on and flash on dash. Loss of power therafter.


hi this problem is caused by a geatbox fault , something is causing the fault code to bring on your warning lights , in this mode the gearbox locks up and the tourqe converter takes up the drive , when you drive of it feels like you only have 3 gear , change the oil and filter in the box and make sure you have the correct level of oil in the box , very important , td5 auto 192k

Jan 13, 2011 | 2002 Land Rover Discovery Series II

1 Answer

Hi - we have a Landrover Discovery II 2002 model - automatic. The M and S lights come on and flash, when this happens there is sometimes a 'clunk' noise. The vehicle is fine if it is going at speed, but...


hi your problem could be the wiring connector to the m&s switch on top of the gear box these connecters can get water in then corrode when the warning lights come on your autobox defaults into 3rd gear which is why you get the slow to move lack of power symptom .
you can get to the wiring from underneath or from above if you strip out the gear shift and console

hope this helps

Nov 02, 2010 | 2002 Land Rover Discovery Series II

1 Answer

2004 landrover freelander amber oil pressure light on


low oil. or its time to change it. if you had it changed then re set the light. its in your manual.

Feb 12, 2010 | 2004 Land Rover FreeLander

1 Answer

WELL ,,,MY 2003 LANDROVER DISCOVERY SE7 ,,WAS RUNNING AMAZING ,,,,I STOPPED AT A STORE SHUT EVERYTHING OFF AND WENT BACK IN AND IT WOULD NOT START,,,,,WE THOGUHT IT WAS BATTERY ,,REPLACED WOULD NOT START...


Probably the starer solenoid. Can occur oddly and a bit of movement cures it as it's a high resistance issue. Cleaning the contacts helps, and reconditioning it can also.

Nov 10, 2009 | 1998 Land Rover Discovery

1 Answer

I connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.


if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).

May 21, 2009 | 1994 Land Rover Discovery

2 Answers

Landrover 96


The differentials should be disengaged or you going to do damage. They should only be locked in when moving at low speeds.

May 07, 2009 | 1996 Land Rover Discovery

Not finding what you are looking for?
2004 Land Rover Discovery Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...