Question about 2005 Chevrolet Malibu

1 Answer

Replace Dash light bulbs on 2004 Malibu Maxx

How do you replace dash panel light bulbs on a 2004 Malibu Maxx light work except on fuel and Temp guage

Posted by on

  • 3 more comments 
  • Anonymous Mar 14, 2014

    Bulbs have been replaced

  • Anonymous Mar 17, 2014

    05 Malibu dash lights blink at me, go of and on repeatedly, that's all I can say about it for now

  • Anonymous Mar 20, 2014

    need fuse box diagram

  • Anonymous Mar 22, 2014

    We have pulled the console and part of the dash and still haven't been able to get the cable out to replace it

  • Anonymous Mar 22, 2014

    bulb is burned out how do I replace



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 505 Answers

You need to take the hole dash out and on the back of the speed dash there are little bulbs take them out then replace them

Posted on Dec 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuse for the stereo on a 2003/2004 chevy malibu maxx

There should be a fuse panel on left side of the dash just inside the drivers door

Jul 31, 2012 | 2004 Chevrolet Malibu

3 Answers

I have a 2000 malibu and the coolant temp and fuel guage does not work and no warning lights work when the key is in the on position (oil, abs, airbag) all fuses are good

I think you're going to need a new cluster. I don't have your wiring diagram, but my 2000 camaro wiring diagram is below. It has a logic device built in that controls the temp and fuel gages.
The same chip also runs the bulb test at startup. I found a used cluster online here for 70 bucks:

A new one from GM is about $240.


Oct 03, 2010 | 2000 Chevrolet Malibu

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges

If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

Changed break light bulb on 2004 malibu maxx but it still isn't working

if both are not working its the brake switch on the break pedle if only one replace the light houseing thats holds the bulb

May 04, 2010 | 2004 Chevrolet Malibu Maxx

2 Answers

2004 malibu maxx third brake light

It is an LED lamp and the entire terminal needs to be replaced. I would suggest checking the fuse first, being that the replacement can run over $60

Aug 08, 2009 | 2007 Chevrolet Malibu Maxx LTZ Hatchback

2 Answers

Stuck CD in the multi CD player of 2004 Chevy Malibu Maxx

The only thing that is left for you to do is to remove the stereo and then disassemble it and remove it yourself. A little daunting but needs to be done. Sounds like it went in wrong and then became jammed

Jun 10, 2009 | 2004 Chevrolet Malibu

1 Answer

Auto lights/dash lights not working- Also all outlets for chargers etc.

check all fuses, but you may have a body control module, problem such as connection corrosion

May 24, 2009 | 2004 Chevrolet Malibu Maxx

1 Answer

Dash light on a 1999 Ford Ranger

You have to remove the instrument cluster in order to replace the bulbs. This will include removing the knee panel under the steering wheel, the black trim piece in front of the instrument cluster, and possibly the trim and vents surrounding the radio, depending where the screws are located.

Some of the bulb holders may have notched the foil contacts on the board and the bulbs won't light after they are replaced. If that happens, you'll need to bend the tabs on the bulb holder slightly and use your finger nail to flatten out the dent in the foil.

It's not a quick fix, so you may want a dealer to service it. I suggest replacing your bulbs with LED's for longer life.

Apr 19, 2009 | 2004 Ford Ranger

2 Answers

2004 chevrolet malibu dashboard lights not working ,gauge needles light up but not the back display lights

Check the dash dimmer switch which is a rheostat type switch and replace if inop.

Feb 07, 2009 | 2004 Chevrolet Malibu

1 Answer

2006 malibu maxx the ac pannel, the "cool" side wont light up blue when the dash lights are on.

Most likely there is a tiny bulb on the inside of your dash panel that needs replaced. Remove the panel if you comfortable to do so, or look to have a mechanic do it.

Jan 13, 2009 | 2006 Chevrolet Malibu

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

1,369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides