Question about 2004 Toyota RAV4

1 Answer

2005 Toyota Rav4

How do you turn out maintenance light and brake light right beside each other

Posted by on

  • dennis rivers Dec 31, 2008

    Ok the maintenance went out very cool ! The brake light is still on. sorry I just read my hand book and it said that this light is for air pressure in my tires. It states adjust tire pressure and turn off warning light by pushing reset switch. But does'nt tell me where the switch is. So if you could tell me where it is located. I would be very appreciated thank you will wait to hear from you! D.T.M. Ps air pressure is ok new tires

  • Anonymous Mar 13, 2014

    recall for brake lights on rav4 toyota 2003

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

PUSH AND HOLD RESET ODOMETER BUTTON, TURN IGNITION IN ON POSITION ONLY (DO NOT START ENGINE)UNTIL LIGHT TURNS OFF. TURN IGNTION OFF AND START ENGINE.
BRAKE LIGHT, MAY BE LOW IN FLUID OR LOW BRAKE PADS.

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS ON,BRAKE RED L ON ALARM ON HARD PEDAL HOW CAN I FIND THE PROBLEM


VSC ABS and ! lights plus red (!) - Toyota Prius Forum ...

www.priusonline.com/...toyota-prius.../19804-vsc-abs-lights-plus-red.ht...

Jun 3, 2008 - 8 posts - ‎3 authors
If the accumulator fails, you will get a red brake warning light and the pump will now run continuosly until it burns out. ... hydraulic pressure to the brake system and "no"red warning lights. .... Fog Lights, PassGas, Toyota Prius General Discussion, 4, 10-13-2005 09:12 AM ... 11-13-2015 10:01 PM by Tim Lee.

Alarm with Brake Light, ABS, VSC and amber warning lights ' PriusChat

priuschat.com > ... > Gen 2 Prius Care, Maintenance and Troubleshooting
Jul 26, 2005 - Later that same day - I started getting an alarm - as soon... ... Gen 2 (2004-2009) Toyota Prius Forums > Gen 2 Prius Care, ... Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by NorthStar, Jul 26, 2005. ... I am getting the red BRAKE LIGHT, the amber waming symbol, ABS, and ... VSC, ABS, (!) and emergency brake light on
Feb 5, 2010
Brake, Brake warning, ABS, VSC appear
Oct 5, 2008
More results from priuschat.com

Nov 24, 2015 | 2005 Toyota Prius

2 Answers

How to reset the change oil light on a 1997 rav4


rav4 reset maintenance light
pretty standard
hold trip A in with engine and key off while holding trip button in turn key and engine on.
keep holding trip button in until light stops flashing when it stops flashing then release the trip reset button this should clear the maintenance warning light. hope this helps

Dec 26, 2014 | 1997 Toyota RAV4

1 Answer

How do i reset maintenance light


Insert the key into the ignition.
Press and hold the trip meter reset button. Turn the engine switch to the "on" position.
Hold the trip meter reset button until the trip meter displays "000000." The maintenance light is reset.

May 14, 2014 | 2005 Toyota RAV4

1 Answer

Reset maintenance light


Try this...
Turn the key to the 'on' position.

Press the trip button meter until it displays the "Trip A" odometer.

Turn they key to the off position.

Then while holding the trip meter down, turn the key to the 'on' position. 4 blinking dashes will display and they will count down.

When the last dash disappears 000000 is displayed to indicate the maintenance counter has been reset.

May 14, 2014 | 2005 Toyota RAV4

1 Answer

Where is the clutch hydraulic pump in a 2002 Toyota Rav4?


It should be located beside the brake master cylinder in the engine compartment by where the clutch pedal is located

Oct 18, 2010 | 2002 Toyota RAV4

1 Answer

My brake lights on my Toyota 1997 Rav4 will not turn off. I believe I need a stop light switch. Is this something I can easily do on my own? How?


it will be located next to the brake pedal arm. removing it and replacing it is not that hard.
adjustments to make it work correctly is simply moving it set the plunger to operate the brake lights when the brakes pedal is pushed down

Jun 06, 2010 | 1997 Toyota RAV4

1 Answer

How do you reset maintenece needed light on Toyota Rav4?


Only do it if you have done the maintenance, To reset the light.turn the key on and the trip odometer to TRIP A, turn key off. Now hold in the trip reset button and turn the key on, keep holding for 10 seconds.

Dec 30, 2009 | 2007 Toyota RAV4

1 Answer

What service(s) does a 2004 rav4 need at 100,000 miles?


This is Toyota's scheduled maintenance for the RAV4 at 100,000 miles...

Replace engine oil and oil filter 1
Rotate tires
Replace engine coolant 2
Visually inspect brake linings/drums and brake pads/discs
Applicable Footnotes:
1) Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil, if vehicle is equipped with this light.
2) Initial replacement at 100,000 miles/120 months. Replace every 50,000 miles/60 months thereafter. Refer to "Engine Coolant" in the "Explanation of Maintenance Items" section in the back of this guide for more information.

Nov 30, 2009 | 2004 Toyota RAV4

1 Answer

Maintenance light on in dash how do you turn it out


you can take it up to an advance or autozone and they should have an obd2 scaner and they can scan it tell you whats wrong and clear the codes

Dec 30, 2008 | 2004 Toyota RAV4

Not finding what you are looking for?
2004 Toyota RAV4 Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...