Question about 2002 Dodge Caravan

1 Answer

No instrument panel turn signals

I have no speedo no fuel gage no temp gage and no turn signals van has been sitting for about 6 months is there a relay that maybe goes to all of these things or hot wire that feeds these

Posted by on

  • whicker420 Apr 26, 2009

    i had the same problem. needles wouldn't move and cluster was dead except for the back lighting. Turn signals wouldn't work and brake lights didn't come on when braking along with no hazards. Wife said she had checked all the fuses and all were good so after the next 6 hours of tearing the car apart and reading all the forums i checked the fuses again from a suggestion on the forum for a specific fuse. Between the accessory fuse and the safety one is one labled Hazard LP. It is a 20amp fuse. Checked it and it was blown. Changed it out and everything was up and running again. Hope this helps.

  • mad_fournier Apr 28, 2009

    I have the exact same problem, with the exception that my brake lights are working. Where would be that instrumentation fuse? I am gonna check that Hazard LP fuse because I am at a loss as to where to look to try to resolve this problem. I also looked under the dash and I can't find any other fuse box. Can anyone tell me exactly where it is located?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check your instrumentation fuse.?

Posted on Dec 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2008 malibu dash goes out along with the taillights and turn signals

Sounds loke a poor connection on the fuselinks . There is a You Tube video on how to test and repair them.

Dec 06, 2016 | 2008 Chevrolet Malibu

1 Answer

Nissan Terrano 1997 R50 ,gauges on instrument cluster not working


"Great choice of service Repair and Manuals"Large pictures deals or discounts is there.You buy in less amount so please use it

May 25, 2016 | Cars & Trucks

1 Answer

My speedos stopped working also rev counter temp gage and fuel also indicators any ideas

Pull the Instrument panel(IP). unplug it, then plug it back in. See if it comes back to life, corrosion. If not, replace the IP. Year make and model helps.

Jul 25, 2015 | Cars & Trucks

1 Answer

Electrical problems?

I want to help you with this electrical problem. Can i have more info. like was car in an accident or has any repairs to instrument panel been performed. The horn is in steering wheel and wipers are in turn signal switch and speedo and odo are in instrument cluster aside from mice living in your dash and chewing on wiring harness they are seperate circuits and are not connected

Aug 03, 2014 | 1996 Dodge Dakota

1 Answer

2004 Dodge Sprinter abrupt engine shutdown.

need more info does it run warm

Jan 29, 2014 | Cars & Trucks

1 Answer

Won't turn over. The instrument cluster won't work

ok iif the instrument cluster does not work.. before i give a solution can you tell me if it have atach and temp gage not a temp gage witha idiot light but a actual temp gage.. because if temp gage and fule gage hands are not in their proper place like if yo uhave a 1/4 tank of gas and it reads way past full and the temp gage is gone out of site way past say 240 degrees then it is your speedo head .. have this trouble the other day on a chevy 2002 cavalier.. replaced the head and wahla the car started. it seems the speedo head is tied in with the computer system on these cars.. and if the tach is not working you need not worry if you cannot find a head with a built in tach.. a normal speedo head with out the tach part will also work.. just when you change the head count the pins on the old one and compare it to the new one if they match then just plug it in and car should start..

May 13, 2012 | 2002 Pontiac Sunfire

2 Answers

Ford transit van dashboard display not working

ive got a 55 plate 85 T260 swb crewcab 68000 miles, , i bought it 12 months ago, red light flashes on dash board most days, some times arratically, sometimes quite slow, and all clocks, speedo and dash does not work?????????
the smallest scratch and the van rusts, no under seal, there just a use it and dump it van.

i would just like to say fords are ****

Dec 27, 2008 | 2003 Ford Escort

1 Answer

Turn Signals, hazard lights & instruments inop

must be the dash connection in the back, need to demount dash panel, and spray wd40 on the connections.

Aug 27, 2008 | 2003 Dodge Grand Caravan AWD

1 Answer

Gauges gone crazy

Could need new instrument panel cluster but check for corrosion as the instrument panel connector

Aug 11, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2002 Dodge Caravan Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides