Question about 2000 Isuzu Rodeo

3 Answers

4 wjheel drive problem

2003 isuzu rodeo. when i press the 4 wheel drive button to engage, it doesnt engageand it blinks

Posted by on

  • Anonymous Feb 03, 2009

    when I press the 4 wheel drive button it will not engage. The light on the dash only blinks.

  • Anonymous Feb 10, 2009

    Sell it and buy a toyota...there is no solution to this problem.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

Not transfer case motor....there is none on a rodeo....trooper has torque on demand.....rodeo problem is likely shift on fly mtr...mounted on front axle....if u dont use 4wd regularly it sticks and gets stuck.

Posted on Feb 15, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The problem is the 4wheel dr actuator, it gets stuck specially if car sits for a while or dont use the 4x4

Posted on May 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Need to have transfer case motor checked.Motorized.

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2003 RA Holden Rodeo 3.0 ltr T/Diesel. The 2 front wheels don't seem to be engaging when i put it into 4wd (high or low range). I can hear the high and low range click in when i press the buttons...


Does yours have AUTO hubs, there are some luxory models have auto hubs, these rely on difference in drive on the axles,(wheel spin) others have manual locking hubs, these actually need to be engaged manually, these require you to twist the centre of the hub to engage and disengage the front hubs, these sometimes require you to reverse to disengage properly, Rodeo had both depending on model. Happy New Year

Dec 30, 2013 | Isuzu Rodeo Cars & Trucks

1 Answer

1999 isuzu rodeo 4wd not working


Sometimes just driving the vehicle for a while in the 4 wheel drive high range position will make the 4 wheel drive engage again. When it does engage the light will come on and it will be hard to turn in a sharp circle- hopping, etc. If this works you need to use the 4 wheel drive more often, and it will free up and work better..It may take a couple of miles or more before it goes into 4 wheel drive the first time. To get it out of 4 wheel drive move it slowly backwards and forwards. Then use it or lose it. Remember, never drive in sharp cirles on dry pavement when you are in 4 wheel drive.

Dec 19, 2012 | 1999 Isuzu Rodeo

1 Answer

My check 4 wheel drive light stays on and will not engage into 4 wheel drive on my 2005 rodeo


With ignition key turned on ,but engine not running, press all 3, 4wd buttons at the same time and hold on for 20 secs. This resets the computer. This same application applies if you are locked in 4x4 and it wont release back to 2wd.

Aug 25, 2012 | 2004 Isuzu Rodeo

1 Answer

I have a 1999 Isuzu Trooper and when I hit the auto 4 wheel drive button it blinks and doesn't engage. The 4 wheel drive works fine. Any ideas what the problem maybe??


While driving, apply the foot brake and press the 4x4 button. If it engages, it can be bad auto locking hubs, or a bad torque converter. This is the same problem I am having right now but I was able to the get the 4x4 to work by doing what I described above. I am going to take off the wheels and check the hubs and eventually work toward the torque converter. I'll keep you updated.

Jan 28, 2010 | 1996 Isuzu Trooper

3 Answers

4wd how to enguage


make sure your in nutural, or park then if you have hub locks turn them to locking position. then shift small shifter if available into 4 wheel low or high. or may have just a push button to engauge. then shift into low or high. then you may use your regular stick to shift or just shift into drive w automatic.

Jan 27, 2010 | 1998 Isuzu Rodeo

2 Answers

I have 2001 isuzu rodeo that the four wheel drive will not engage when the button is pushed. All I hear is a clicking and the four wheel light blinking. Any thoughts?


fords are famous for this. Its electronically controlled 4x4(push button) i would start cheap and replace that switch

Dec 08, 2009 | 2001 Isuzu Trooper

1 Answer

My Four Wheel Drive will not engage on my 98 Isuzu Rodeo. The Engage light just blinks and never goes solid. What are some possible solutions?


try doing the change while engine off and in neutral, or engine runnin and in neutral. if not try same in Park. worked for me

Dec 26, 2008 | 1998 Isuzu Rodeo

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

1,530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...