Question about 2002 GMC Sierra

1 Answer

How do i get my change oil light to go out i dont have owners

Dont have owners manual

Posted by on

  • Anonymous Mar 09, 2009

    CHANGE ENGINE OIL LITE CAME ON AND CAN`T GET IT TO GO OFF.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 78 Answers

Turn the key on engine off hit the acclerator three times to the floor let off and the oil light will start flashing shut the key off while flashing then turn back on this should reset it

Posted on Dec 30, 2008

3 Suggested Answers

ZJLimited
  • 17970 Answers

SOURCE: How to reset oil change light?

Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra
Years: 2000-01, 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Hope this help (remember rated and comment this help) Good luck.

Posted on May 14, 2010

c1apton15
  • 3400 Answers

SOURCE: i changed the oil in

You need an OBII scanner but... Autozone, Advance or any good auto parts store will reset it for FREE for you.

Posted on Feb 25, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2001 bettle changed oil and now oil light comes on but is blue


I assume that it is the oil change hasn't been reset, or the oil pressure is still a bit low. Find the owners manual. Online or dealer...

Feb 14, 2015 | Volkswagen Beetle Cars & Trucks

1 Answer

I changed the oil in my 2002 mercury mountaineer .I dont have a owners manual .and the change oil light comes on how do i take it off


You need an OBII scanner but... Autozone, Advance or any good auto parts store will reset it for FREE for you.

Feb 25, 2011 | Mercury Mountaineer Cars & Trucks

2 Answers

Dont have manual and a light came on dashboard looks like oil can but not what is it


If the oil can light goes on, check the level in the crankcase by checking the oil dipstick under the hood. It may be low.

If it is at a full level, then the oil light may indicate low oil pressure. Change the oil and filter to see if the condition improves. If it doesn't, then the oil pump may be bad. One can test the pressure of the oil while the engine is running by putting a gauge on the area where the oil pressure sending unit is, and reading the value to see if it is within specifications.

Good luck on this repair.

Feb 15, 2011 | 1998 Cadillac Catera

1 Answer

Perform Service light came on and I dont have a Owners Manual . What kind of service it might need?


Many times this light will come on when the oil needs to be changed.If oil has been changed recently the light may have not been reset at the time of service so the computer doesn't know when the oil was actually changed.

Jun 10, 2010 | 2002 Jeep Grand Cherokee

1 Answer

I want to change motor oil,but i dont know what ki...


The link below is a free online owners manual for your car. Page 290 shows the grade of oil to use. Page 291 shows the viscosity of oil to use at various outside temperatures. Hope this helps...

http://www.autoownermanuals.com/manuals.item.2818/Nissan-Murano-Owners-Manual-2005.html

May 21, 2010 | 2005 Nissan Murano

2 Answers

Oil maintenece light is on. Oil level is good. Could a clogged filter make this light go on?


This should only be indicating time for an oil change. Now, if the red, check engine light comes on, then you have an oil/engine problem.

Possibly the maintenance light wasn't reset when the last change was done. If you don't have the owners manual to check, I found a referenced method (below) to reset it through AMSOIL synthetic oil products. Good Luck

To reset Engine Oil light. Turn the ignition key to RUN with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.

Feb 09, 2010 | Saturn L-Series Cars & Trucks

4 Answers

Oil light stays on


You need to put the key on and push the gas pedal to the floor three times within five second to reset the oil life light.Some g.m.'s have a reset buttom in the fuse panel that needs to be pushed first and some don't.Check the owners manual under change oil for your specific year car.

Oct 21, 2009 | 2003 Chevrolet Impala

2 Answers

Change engineoil light came on premature


it probably was not reset when oil change was done last .here is how to reset turn key on press gas pedal to the floor three time with in five seconds then wait ten seconds and start car it will go off.please rate this answer thanks

Feb 01, 2009 | 2004 Pontiac Grand Am

5 Answers

Check Oil light stays on even after the oil has been changed


well, it is in the manual under engine oil. turn key to on, dont start. press gas pedel to the floor "slowly" 3 times within 5 seconds. if the change oil light flashes, its resetting. If not, repeat.. this worked for me.

Jul 02, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
2002 GMC Sierra Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...