Technics ST C04L

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 1999 VW Passat radio is:
1. Simultaneously push "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then simultaneously push again "SCAN" and "RDS" keys to confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready to use!

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a Volkswagen dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2003 VW Golf radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

The sequence of programming for 2001 VW Cabrio radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

I'm hoping that you are in the states, because I have a free stateside number that you can call. Here are a full set of instructions to get you sorted out:

If it says "OFF" turn the key to ACC for 5 minutes with the radio on, and displaying "OFF". After 5 minutes the radio will turn itself off. Turn the key off then back on again. The radio should now display "CODE". If this doesn't work disconnect the battery for 5 minutes, and repeat the 5 minutes radio on displaying "OFF" with key in ACC until the radio turns itself off. Now that it says "CODE" go to step 2. The radio must display "CODE" to enter unlock code.

2 Find the radio serial number The radio's serial number is on the left side of the case that is inside the dashboard. You will have to remove the fascia that is around the radio carefully to reveal it. In most models you can use a small dental style mirror to see the code without completely removing the radio. If you can't see it this way you will have to take it all the way out. Don't disconnect anything just pull it out far enough to see the numbers. The model number starts with MNxxxxx, this is not the number you need. The serial will be an 8 digit number, no letters. It will be close to the model number however.

3 Now that you have your serial number call Mitsubishi Motors of North America at 1-888-648-7820, M-F 7am - 4pm Pacific time. They will give you your unlock code for free.

4 Now that you have your unlock code you have to enter it into your radio. They should take you through this on the phone, however, here's how:

The 1,2,3,4 preset buttons on your radio toggle up only through the digits 0-9. The 1 preset button is the first digit holder, and so on for the 4 digit code. If you go too far just keep pressing the button, and it will go back to 0, and you can get back to the right number. If your unlock code has a 0 in it you have to press the button once to get to 0. It starts with a dash (-). This doesn't count as the 0. For instance if your unlock code is 0873, you will press preset 1 once, preset 2 9x, preset 3 8x, and preset 4 4x. Once you have the correct number in the diplay press the "CD" button, and it will unlock your radio. If you didn't do it right, it will display "ERR1" before going back to the "CODE" display. Don't mess up more than twice. After the third failed try things get a lot more complicated!

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

The sequence of VW radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of Audi radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from an Volkswagen dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 1999 VW Passat radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

I know you can that you can change this by simply hooking up a scan tool for specific year. There are language options accessible for situations like this. Here is a sample of what can be changed using VAG 5052 or equivalent scanners.

Coding

• 0?xxxxx: Model
  • 1 = Lamborghini
  • 2 = Audi A3 (8P)
  • 3 = Audi A4 (8E)
  • 4 = Audi A4 Cabriolet (8H)
  • 5 = Audi A6 (4B)
  • 6 = Audi TT (8J)
  • 7 = Audi R8 (42)
• 0x?xxxx: Treble Speaker Monitoring inactive
  • 0 = Front Treble Speaker Monitoring inactive active (NOT Audi A4 Cabriolet)
  • 1 = Front Treble Speaker Monitoring inactive inactive (ONLY Audi A4 Cabriolet)
• 0xx?xxx: Sound Characteristic
  • 0 = Sound Characteristic linear
  • 1 = Audi A4 (8E)
  • 2 = Audi A6 (4B)
  • 3 = Audi A4 Cabriolet (8H)
  • 4 = Audi TT (8J)
  • 5 = Audi A3 (8P)
  • 9 = Sound System
• 0xxx?xx: Telephone/Telematic
  • 1 = Telephone not installed (Remote Feed Voltage for Microphone active)
  • 2 = Base Plate (Temic - Remote Feed Voltage for Microphone inactive)
  • 3 = Base Plate (Cullmann - Remote Feed Voltage for Microphone inactive)
  • 4 = Base Plate (Nokia - Remote Feed Voltage for Microphone inactive)
  • 5 = Telematic Europa (Remote Feed Voltage for Microphone inactive)
  • 6 = Telematic US (Remote Feed Voltage for Microphone inactive)
  • 7 = Base Plate diagnostic capable with Comfort Control
• 0xxxx?x: Equipment I
  • 1 = Tuner not installed
  • 2 = Digital-Radio installed
  • 3 = Satellite-Radio installed
  • 4 = Satellite and Digital-Radio installed
  • 5 = Analog Input (AUX) installed
  • 7 = Satellite-Radio & Analog Input (AUX) installed
• 0xxxxx?: Equipment II
  • 1 = TV-Tuner/CD-Changer/Multi-Function Steering Wheel not installed
  • 2 = TV-Tuner installed
  • 3 = CD-Changer installed
  • 4 = TV-Tuner and CD-Changer installed
  • 5 = Multi-Function Steering Wheel installed
  • 6 = TV-Tuner and Multi-Function Steering Wheel installed
  • 7 = CD-Changer and Multi-Function Steering Wheel installed
  • 8 = TV-Tuner and CD-Changer and Multi-Function Steering Wheel installed
    
    

Adaptation Channel 001: Tire Circumference The tire circumference is beeing adapted in "mm".


Channel 002: Wheel Pulse The wheel pulse describes the amount of wheel pulses per revolution.
If value 0 is entered the system calibrates automatically itself after several kilometers and inputs a value.

• 43 = Audi A3 (8P) / Audi TT (8J)
• 45 = Audi A4 (8E)

Channel 003: Language (Screen)

• 0 = German
• 1 = English (UK)
• 2 = French
• 3 = Italian
• 5 = Spanish
• 6 = Portuguese
• 7 = English (UK)

Channel 004: Back-Up Camera

• 0 = Back-Up Camera not installed
• 2 = Back-Up Camera installed

Channel 005: Speed Threshold (Video Input)

• 0 = max. 0 kph or 0 mph
• 1 = max 5 kph (Standard for Europe)

Channel 007: Options Channel 008: Volume Characteristic Channel 010: Region

• 0 = Europe/North America
• 1 = Australia/South America
• 2 = South Africa

Channel 011: Language (Speech Recognition)

• 0 = German
• 1 = English
• 2 = French
• 3 = Italian
• 5 = Spanish

Channel 018: Start Screen The start screen setting has to correspond with the control module coding, e.g. a S3 start screen doesn't work with an A4 coding.

• 0 = Standard Start Screen
• 1 = Audi S3 Start Screen
• 2 = Audi S4 Start Screen
• 3 = Audi RS4 Start Screen
• 4 = Audi TT Start Screen
• 5 = Audi R8 Start Screen

Channel 065: Read Test Channel 066: Self Test Channel 067: CD/DVD Drive

• 000 - Normal/Eject-Button enabled
• 001 = Eject CD/DVD (will not be saved)
• 255 = Eject-Button disabled/locked (Anti-Theft-Protection)

Channel 068: Screen Test Values will not be saved, they only act as initiation for each Test Picture.

• 0 = No Test Picture
• 1 = Test Picture: Red
• 2 = Test Picture: Green
• 3 = Test Picture: Blue
• 4 = Test Picture: White
• 5 = Test Picture: Black
• 6 = Test Picture: Checkerboard
• 7 = Test Picture: Checkerboard (inverted)
• 8 = Test Picture: 64 Gray Scales (vertical Bars)
• 9 = Test Picture: Special

Channel 069: Display Mechanism

• 000 = Display closed
• 001 = Display open
• 200 = Display half open (Obstacle)
• 255 = Position undefined

Channel 070: Display Brightness

• 0 = 0% Brightness (Display OFF)
• 1 = 20% Brightness
• 2 = 40% Brightness
• 3 = 60% Brightness
• 4 = 80% Brightness
• 5 = 100% Brightness

Channel 099: Transport Mode Only applies to models without Gateway/Diagnostic Interface for Databus.

• 0 = Transport Mode inactive
• 1 = Transport Mode active

Channel 111: Reset

• To perform a system reset/restart save 1 as new value.

Channel 114: FM Frequency

• Range: 875...1080

Channel 117: Signal Test (Output)

• 0 = Fader Center & Balance Center
• 1 = Fader Front & Balance Left
• 2 = Fader Front & Balance Right
• 3 = Fader Rear & Balance Left
• 4 = Fader Rear & Balance Right

Channel 136: Driver Position

• RNS-E Basic
  • 03226 = Left-Hand-Drive (LHD)
  • 02632 = Right-Hand-Drive (RHD)
• RNS-E High/US
  • 00005 = Left-Hand-Drive (LHD)
  • 00013 = Right-Hand-Drive (RHD)