Question about Hyundai Motor 1993 Excel

1 Answer

98 Hyundai Elantra turn signal and hazards only work sometimes.

This problem started a month ago. I know all the bulbs work because depending on the day the signals and hazards will work. When the signals and hazards do work it is for a short amount of time it may not last the entire drive. When the turn signals and hazard lights are not working there is no sound, no interior panel signals and no outside lights blinking. Also 2 months ago the panel lights would not illuminate at night so you couldn't see the speedometer and such. I checked the panel brightness and it was at it's highest setting so it wasn't something stupid like that. The next day there was no problem and I haven't had a problem with that since. Thank you very much for your time and help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to replace the fuse - have a look at the manual and see which fuse it is buy a new one put it in and it should be fine - the on off thing is where the fuse wire touches and then moves again.

Posted on Jul 27, 2009

1 Suggested Answer

  • 1 Answer

SOURCE: 98 Elantra Turn Signals and Hazards Broken

Check your flasher. The flasher is a round metal thing inside the fuse panel. There are two fuse panels in the 98's, one inside the car by the hood release latch, and one under the hood by the battery. I'm not sure which one the flasher is in, but that definetly sounds like your problem. It simply plugs in like a fuse, and I would say it probably costs less than ten bucks, so I would try that first before anything and even if thats not the problem you only wasted a few bucks. Oh yea on a few cars the flasher might not be in the fuse panel, if it's not in yours its probably under the dash. If you cant find it or don't think you know what it looks like, I would go to the auto parts store and buy the new one, that way you know what your looking for. Good luck, hope this helped you.
-ADAM BOMB-

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix flashers on 2002 elantra?


try changing flasher and check all bulbs ,some cars use a flasher relay

Sep 26, 2014 | 2002 Hyundai Elantra GLS

1 Answer

Turn signals and hazards stopped working on 2000 hyundai elantra


If the hazard switch had been removed and replaced for any reason, it may not have been connected properly.ie: a loose connector, If you say that bulbs (and fuse?) are okay, this could be checked.
Lou Arnone (Lucky Elantranian)
P.S.: I love my Elantra. When I bought it more than eleven years ago, it was love at first drive. It's been that way ever since.

Mar 28, 2013 | 2000 Hyundai Elantra

1 Answer

Asked this on 12/20 no response so asking again. 95 Hyundai elantra. Turn switch works part time. Put another used switch in but still same issue. When it's out nothing works, no turn, no hazard, no...


Hi,
My 1999 Elantra has a similar problem with the turn signal, I checked the switch itself and it worked fine, eventually I found out that it was the hazard switch that is faulty, to test it try and turn your car on, activate turn signal and press down on the top of the hazard switch or just fiddle with it. Just a thought, worked with mine. Good luck.

Dec 23, 2011 | 1995 Hyundai Elantra

1 Answer

My hyundai elantra 2003 model,hazard signal not functioning but turn signal is function.


You have two separate fuses. Fuse #1 provides power to turn signals. Fuse #4 provides power to the hazard lamp circuit.

Photo:


ghost45_17.jpg
Fuse Box


ghost45_18.jpg

ghost45_19.jpg

Jun 10, 2011 | Hyundai Motor 2003 Elantra

1 Answer

The Flashers all work Hazard and l & R signals or they all do not


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Sep 24, 2009 | 1998 Hyundai Elantra

1 Answer

98 Elantra Turn Signals and Hazards Broken


Check your flasher. The flasher is a round metal thing inside the fuse panel. There are two fuse panels in the 98's, one inside the car by the hood release latch, and one under the hood by the battery. I'm not sure which one the flasher is in, but that definetly sounds like your problem. It simply plugs in like a fuse, and I would say it probably costs less than ten bucks, so I would try that first before anything and even if thats not the problem you only wasted a few bucks. Oh yea on a few cars the flasher might not be in the fuse panel, if it's not in yours its probably under the dash. If you cant find it or don't think you know what it looks like, I would go to the auto parts store and buy the new one, that way you know what your looking for. Good luck, hope this helped you.
-ADAM BOMB-

Jan 02, 2009 | 1998 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 1993 Excel Logo

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...