Question about 2000 Mercury Sable

1 Answer

I need to locate the transmission pressure valve for a 1997 mercury sable sedan

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

You wont be able to find it unless you take the trans out and apart...Goto to a AAMCO transmission and tell them you have a intermitent problem and they should scan your trans for free!

Posted on Dec 29, 2008

  • Mark S
    Mark S Dec 29, 2008

    you wont be able to find it unless you take the trans out and apart...Goto to a AAMCO transmission and tell them you have a intermitent problem and they should scan your trans for free!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are located cooler line for the transmission 1997 mercury sable


Tranny cooler lines usually are about 1/2" outside diameter steel or reinforced rubber going to a separate chamber in radiator side or bottom. Always one in and one line out separated by about 10 inches apart. You can follow those lines back to the tranny.

May 12, 2014 | 1997 Mercury Sable

1 Answer

Transmission pan gasket


Not too hard at all, even easier if you have it up on a lift. But if I remember right the pan is easy to get to without having to remove anything else. It is a good idea to go ahead and replace the filter while you are there. Make sure you get the rubber seal out of the valve body when you remove the old filter.

Apr 23, 2013 | 1997 Mercury Sable

2 Answers

1990 merc sable, where is the shift solenoid , ss1 , located? thanks


It is inside the the side pan of the transmission,ss1 ss2 ss3 are identical.SS1 is the top solenoid.You will need to remove the subframe to get the side pan off, and this is tricky.Good luck!

Mar 25, 2011 | 1990 Mercury Sable

1 Answer

1997 Sable wagon transmission range sensor location?


It is on the top of the transmission. has a large connetor going to it.

Jan 28, 2011 | 1997 Mercury Sable

1 Answer

Transmission leaks on my 94 mercury sable on passenger side. liquid squirts out through bumper. is it just a line or do i need to change transmission?


Your car probably has a transmission cooler located parallel or near the engine coolant radiator. These flimsy things eventually fail but if you are lucky, it may be a connecting line only. You'll have to locate the lines and cooler from below.
This needs to be done soon, otherwise you will lose enough to break down once the transmission starts slipping from low pressure and fluid level.

Jan 16, 2011 | 1994 Mercury Sable

1 Answer

Where is the low pressure ac port or valve located at? on a 2002 mercury salbe


The low pressure ac port on my 2001 sable is located by the passenger side firewall.

Jun 29, 2010 | 2002 Mercury Sable

1 Answer

1997 mercury sable won't shift into overdrive. We think we may need to replace the transmission. If so, what vehicle transmissions will work in a sable?


first of all, check the kickdown cable to transmission. it may be out of adjustment. or just bad.if its the cable out of adjustment, it is sure cheaper then a tranny.

Mar 03, 2010 | 1997 Mercury Sable

1 Answer

No oil pressure, camshaft position sensor error,


Yes, the sensor is in small housing the goes in the hole where the distributor used to go. That also drives the oil pump so don't drive it you'll ruin the engine. It's located down under the throttle body, near transmission end of the engine.

Jan 04, 2010 | 1997 Mercury Sable

Not finding what you are looking for?
2000 Mercury Sable Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...