Question about 2001 Chevrolet Blazer

1 Answer

Removing fuel meter from plenium on 01 chevy blazer

Trying to remove intake and plenium won't come off . from 2001 chevy blazer.

Posted by on

  • heffnerron Jan 08, 2009

    never mind

  • heffnerron Feb 10, 2009

    it was just really stuck at the fuel meter, the oval o-ring. just had to yank real hard.thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

You are missing a bolt, or you will have to remove one of the heads.

Posted on Feb 09, 2009

  • spankie09 Feb 10, 2009

    I knew it could not be much to it. That great.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 02 blazer i want to put a motor out of a 98 in it will it interchange


Chevy Blazer Engine Swap Part 1 of 2 - YouTube

? 10:29
https://www.youtube.com/watch?v=Dt_7AKP2WcI
Aug 13, 2011 - Uploaded by Dave R
Replacing the engine in a mid-size Chevy Blazer 4x4 with oneout of a Jeep Cherokee 2wd. Original engine was low and motoroil and spun a bearing. ... Chevy Blazer Intake Gaskets Replaced & Cooling System Rebuilt - Duration: 16:45. by ... 4:02. 94 4.3l Vortec V6 GM (black motor) - Duration: 6:01. by ...

4.3 vortec engine removal - YouTube




Jan 01, 2016 | Cars & Trucks

1 Answer

How do I remove and re install the CPI unit and gaskets on a 1998 Chevy Blazer with Vortec V6


You have to reove the upper plenum. that is the part on top of the intake that looks like a dome on top of the lower intake.There is 8 10mm bolts around the outside of the dome part. the disconnect the fuel lines at back of lower intake and remove the cpi unit.

Sep 12, 2014 | 1998 Chevrolet Blazer

1 Answer

I found out that my 2001 blazer had no gasket in it replace them but still smelling gas and it making noise what ekse could it be I need help


If you are smelling gas it is because you are getting excess fuel somewhere
Most likely it is the fuel injection unit or the fuel pressure regulator inside the intake plenium on top of the motor there is a shrader valve on top on drivers side of air intake on the fuel lines have someone pressure test the fuel pressure when you turn the key on and off three or more times to prime the pressure then turn the key off and watch the gauge while priming pressure the pressure should be 60 psi then after priming pressure and turning key off pressure should drop to 55psi and hold that pressure for 5 minutes minimum if it does not hold that pressure and starts dropping to zero your fuel injection unit and pressure regulator are leaking and dumping excess gas into the air intake plenium and it is easier to replace the injection unit and the pressure regulator as you can buy them cheaper combined a new injection unit comes with the new fuel pressure regulator
And if they are leaking gasoline after a failed pressure test that is why you are smelling gasoline
Have it pressure tested right away as if this indeed is the cause the excess fuel could combust at one point and cause a lot more damage
A pressure tester can be purchased at advanced auto for around 35 or any reputable garage can pressure test it in front of you in 5 minutes it's easy

Apr 13, 2014 | 2001 Chevrolet Blazer

1 Answer

I need fuel circuit diagram for chevy blazer 2001 model


a 01 blazer has no carb but is fuel injected

Jul 15, 2012 | Cars & Trucks

1 Answer

I have a 99 chevy blazer won't start but will turn


You may have a fuel pressure problem or the secuirty system has locked you out for some reason due to a false signal or failed part. Do you have any electronic engine control codes? Is the Security light on in the instrument cluster and fishing when you try to start the truck? To check the fuel issue get a can of spray starting fluid from the auto parts store or any hardware store and spray it into the air intake of the engine while someone cranks the engine, if it starts you may have a defective fuel pump, the pump is located inside the fuel tank, the fuel tank must be removed to access and replace the pump.

Feb 14, 2012 | 2000 Chevrolet Blazer

1 Answer

Have a 95 chevy blazer idles rough after warms up. gives black smoke


Sounds like you have a fuel leak inside the intake. Remove the upper intake manifold. Cycle the key on and off and check for leaks from the fuel lines and pressure regulator.

Jun 09, 2010 | 1995 Chevrolet Blazer

2 Answers

My 2001 chevy blazer (v-6, 4.3L)., has a fuel injector problem and I would like to know how to repair the number 5 injector.


You will need to remove the fuel rail bolted to the intake manifold. There maybe a clip holding on the injector. Spraying some WD-40 on the ends of the injectors to aid removal, also when installing, spray some on the O-rings, will help in installing them. Make sure all are seated.

Mar 08, 2010 | 2001 Chevrolet Blazer

1 Answer

'01 Chevy Blazer transmission randomly switches from 2 to 4 wheel


Try this.My Blazer the same.Took the dash switch out, removed the back plate from the switch.Cleaned the four brass contact areas on the circuit board with a pencil eraser, then rubbing alcohol.Re-installed & works perfectly.

Sep 04, 2009 | 2001 Chevrolet Blazer

1 Answer

01 chevy blazer fuel trouble


replace the fuel pump electrical wire harness.

May 25, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...