Question about 1987 Nissan Maxima

1 Answer

I need to put a new belt on and I need a diagram or help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

In stores (autozone) you can pick up a Haynes repair manual for about $20 it has step by step instructions including pictures and diagrams.

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO PUT A BELT ON A 1998 CROWN VICTORIA


  • I have posted the diagram you need to reference. In red I have indicated the tension pulley.
  1. Take a socket and ratchet (breaker bar works best) or a wrench and put it on the bolt of the tension pulley.
  2. Now you want to tug to the left until the tension on the belt loosens and then carefully let the tension pulley go back to it's normal position.
  3. Now take the old belt and compare it to the new belt. Make sure the tracks, length and width match up.
  4. Put the new belt on on the pulleys as indicated in the diagram leaving the tension pulley for last.
  5. Now put your ratchet or wrench back on the pulley and pullback on it again and put the belt on it.
  6. Now start the engine and inspect the belts rotation.
  7. If the old belt did not completely snap the I would throw it in the trunk. It beats sitting on the side of the road sometime should the new belt break.
  8. That's it, job complete.

ironfist109_180.jpg
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jul 19, 2011 | 1998 Ford Crown Victoria

3 Answers

I need a belt routing diagram for a 2000 ford taurus 24v dohc engine. Know where I can find one on the web? (No sticker under the hood. And I was dumb enough not to pay attention when I took it off.)


OK, one doesn't need a belt routing diagram to reinstall a new belt.

Just route the belt so that one by one you put the ribbed part of the belt up against the ribbed pulleys, and the smooth part of hte belt up against the smooth pulleys. Do this until one arrives at the tensioner and release tension with a breaker bar to put the belt on the final tensioner pulley.

Check that the tensioner has enough spring load for the belt to maintain the right friction against all of the serpentine pulleys.

That's all there is to it.

Sep 09, 2010 | 2000 Ford Taurus

2 Answers

Replacing serpentine belt I need a diagram. The belt broke and I'm not sure how to put the new one on.


for the most part there is a diagram under the hood but give this website a try drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.

Jan 03, 2010 | 1992 Buick Century

1 Answer

I need a belt diagrame for a 3.5 mitsubishi


autozone.com has some great diagrams! It sure helped me when I had to figure out how to put on my new compressor belt! Hope this helps!

Aug 04, 2009 | 2002 Mitsubishi Montero

1 Answer

Diagram to replace serpentine belt for 2003 outlander


try these websites drive belt diagram www.webcrawler.com and www.alldatadiy.com and for the most part there shoulld be a diagram under your hood showing you how to put the new belt on.

Jun 21, 2009 | 2003 Mitsubishi Outlander

1 Answer

Belt replacement


what i do is draw me a diagram before i take the old belt off you can also ask the auto part store where you get the new belt and for the most part they have a diagram for a long time came on the box with the new belt in it.

Apr 13, 2009 | Chevrolet Cavalier Cars & Trucks

4 Answers

Need a belt diagram


Good Day,

6fbb0fa.jpg

4a9a5c2.jpg
One is with A/C the other w/o.

Hope this helps

Jul 08, 2008 | 1995 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...