Question about 1998 GMC Jimmy

1 Answer

How do i fix my GMC suburban tail lights?

Running lights don't work, neither do reverse. Brakes and turn are fine. I replaced all bulbs, fuses and both circuit boards. what am i missing?!? HELP!!!

Posted by on

  • jason_l_mart Dec 29, 2008

    I'm only able to locate the one next to the parking brake. where are the other 2? cluster still works although the radio has been removed (purchased the truck used)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 413 Answers

Did you check all three fuse boxes? Does your instrument cluster still work?

Posted on Dec 29, 2008

  • Dan rogers
    Dan rogers Dec 29, 2008

    it has 2 fuse boxes. One is under the hood and the other is accessible when the driver's door is open. It has a removable panel that is in the side of the dash that is covered when the door is closed.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the tail light fuse?


Rear Lights May Be Out Due To Failed Light Socket Plate ...

repairpal.com > Problems > GMC > Envoy
no tail light on passenger side. replaced tail light circuit board, fuses and bulbs. I havebrake lights ... 2003 GMC Envoy75,000Visitor. My brake light got ... How do I replace the high mount third brake light on a 2002 gmc envoy? The light does ...

Chevy Trailblazer- No Brake Lights! It's an easy fix.. - YouTube

? 12:22
https://www.youtube.com/watch?v=m0GkI5Jmrgo
Sep 7, 2014 - Uploaded by CheapGeek
My 2008 Chevy Trailblazer had no brake lights! It was ... Chevy Silverado 88-98 brake light switch replacement GMC Sierra tahoe Suburban ...

GMC Envoy XL: brake lights..the fuses and the bulbs..lights ...

www.justanswer.com > GM
images for 2003 gmc envoy wiring

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

Why are my rear lights are not working on my 93 GMC Suburban? All other lights work. I am unable to drive at night as I can only be seen if I apply the brakes. Which is the fuse for these lights or w


If front running lights work, I would crawl under rear and find light wires and use a test lamp to find the hot wire with only running lights on, then trace that wire to find the break. If front running lights are not working, check all fuses, then check headlamp switch.

Jan 13, 2015 | 1993 GMC Suburban

1 Answer

None of my tail lights work. i changed the bulbs, tail light control board and fuses. I'm an electrician so i need a wire diagram of a 1996 chevy suburban


Your solution is a new combination switch,It also sounds like the hazard are activated and is non operation interfering with the brake light,but either way the solution is a combination swith

Jul 08, 2012 | 1996 Chevrolet Suburban

1 Answer

My left tail light and turn light not working on 1998 gmc suburban. Bulb is fine.


Sounds like you have a bad tail light circuit board.

unplug the connector and use a test light to confirm there is power to the circuit board for the lights that do not work. If there is power replace the circuit board. They are usually in stock at your local parts store.

Feb 09, 2012 | 1998 GMC Suburban

2 Answers

I have a 1995 GMC Sierra pickup and my tail lights don't work


there is a big green fuse in the fuse box under the hood. cost about 6 bucks. replace that

Jan 30, 2012 | 1995 GMC Sierra

1 Answer

Tail lights do not work, blinkers work, brakes work, but tail lights do not. This happened when I hauled my boat home, so I disconnected the trailer light harrness and they still don't work, fuses are...


I bet you missed a fuse. Your tail lamps are protected by fuse #9 in the instrument panel fuse block. It is a 20 Amp fuse and is marked "PARK LPS".

Sep 02, 2011 | 1997 Chevrolet Suburban

1 Answer

95 Chevy truck tail lights don't work; everything else- brake, turn, backup & hazard do.I checked fuses in dash, replaced headlamp switch-still won't work.


check the bulbs they are a duel fillament bulb possibly have wrong bulb or one side is burnded out. if I remeber correctly the part No#3157 it should be stamped on base of bulb these should be the 2 top bulbs.the lower reverse light is a single fillament part No#3156 also check the sockets and plugs for a good connecton.

Jul 02, 2009 | 1995 GMC Suburban

1 Answer

I have a short to ground problem with my tail/crtsy light circuit ( keeps poppin fuses when the light swith is pulled to on position) also dash lights & tail lights don't work but interior light is on...


Try removing the bulbs from the rear tail lights you have one 2 bulb system shorting out, so one at a time remove the bulbs then replace the fuse and see which one is bad or just buy new bulbs and replace, also could be front running light blinker light. But sounds like brake light to ground threw bulb.

Jun 13, 2009 | 1985 GMC S-15

Not finding what you are looking for?
1998 GMC Jimmy Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...